2018 Ascot Buyer's Guide_compressed

460
TIRE REPAIR // THERMOPRESS & EXTRUDERS
Thermopress, Extruders
TIRE REPAIR // THERMOPRESS & EXTRUDERS
Thermopress
& Extruders
EM THERMOPRESS I
• Designed especially
for bias and radial
agricultural and OTR
tires in sizes ranging from
14.00" to 29.5" • Can be
used on the tread, shoulder
and sidewalls of bias and radial
truck tires from size 11.00” • High
impact casters allow easy movement
of the EM Thermopress I anywhere in the shop
• Precise automatic temperature and digital
time controls assure proper cures • Extended
cure cycles up to 24 hours are possible • Curing
temperature adjustable up to 320°F; pneumatic
pressure system adjustable up to 145 PSI
ASCOT NO. MFG. NO. DESCRIPTION
512-06580 6580 EM Thermopress I
EM THERMOPRESS II
• For the repair of large
bias or radial agricultural
and OTR tires • Completely
portable • Precision electronics
adjust and monitor pressure,
temperature and cure time,
while reliable loading/latching
mechanisms help assure safe
operation • Curing temperature
adjustable up to 320°F and hydraulic
pressure system up to 2,275 PSI • Extended
curing cycles up to 24 hours is possible
512-06580
512-06575
THERMOPRESS DUPLEX
• Deluxe model for the economic
repair of car, truck and EM tires up
to 20.5" to 25" • Equipped with
swiveling top heating plate for
more convenience • PACKAGE
INCLUDES: Table support clamp,
pressure equalizing pad, car
adapter set, heat control/timer unit
• Requires a 110V power source
512-06750
ASCOT NO. MFG. NO. DESCRIPTION
512-06750 6750 Thermopress Duplex
THERMOPRESS II
• For the economic repair of radial and
bias-ply passenger, light truck, truck and
small agricultural and OTR tires • Delivers
quick, safe vulcanization of sidewall,
shoulder and tread area repairs up to 4"
in size • Unique C-clamp design allows
for the vulcanization between the legs
of rear agricultural and large OTR tires
• Low operating temperature and precise
controls assure no deformation of the tire
ASCOT NO. MFG. NO. DESCRIPTION
512-06700
512-06700 6700 Thermopress II with Stand
512-06701 6701 Thermopress II
EXTRUDERS
• Compact construction and
economical in power consumption
• Perfect for filling skives and for
section repair buildup • Feature
Bosch drives, variable heat control
from 32° to 248°F • Complete with
different nozzle configuration
ASCOT NO. MFG. NO. DESCRIPTION
512-06575 6575 EM Thermopress II with Stand
EM THERMOPRESS III
• For the repair of large bias and
radial tires (size 30.00" to 51"
and larger) • Completely
portable • Curing
temperature adjustable
up to 320°F and
hydraulic pressure
system up to 2,275 PSI
ASCOT NO. MFG. NO. DESCRIPTION
512-06585 6585 OTR Tire Repair Stand
512-06595 6595 EM Thermopress III
512-06595
ASCOT NO. MFG. NO. DESCRIPTION
EXTRUDER PARTS
511-14015 196 14015 Extruder Thermostat
511-14014 196 14014 Extruder Heating Element - 220V
511-14013 196 14013 Extruder Heating Element - 110V
511-14009 196 14009 Extruder Screw for 6790 Mini Extruder
511-67020 670/20 Pneutec Extruder Screw for 6792 Extruder
Extruder
Repair
Service
Available!
ASCOT NO. MFG. NO. DESCRIPTION
511-06790 6790 Mini-Extruder, 110V, Self-Heating, 1/2 hp
Bosch Drive, Variable Heat Control from
32° to 248°F, Extrudes 40 Lbs.-Hour
511-06792 6792 Bench Top Nail Hole Extruder 1/4 HP Drive, 110V, 5
Nozzle Sizes, Bosch Drive, Heating Unit, Variable Heat
Control from 32° to 248°F, Extrudes 11 Lbs.-Hour
511-06794 6794 OTR Extruder, 110V, Self-Heating, 3/4 hp
Bosch Drive, Variable Heat Control from
32° to 248°F, Extrudes 66 Lbs.-Hour
BUYER'S GUIDE
ASCOT SUPPLY CORPORATION
SUPPLY CORPORATION