2018 Ascot Buyer's Guide_compressed

322
SERVICE EQUIPMENT // BRAKE LATHES
Brake Lathe Accessories
Brake Lathe Accessories & Adapters (cont.)
BRAKE LATHE PARTS
SERVICE EQUIPMENT // BRAKE LATHES
ASCOT NO. MFG. NO. ITEM DESCRIPTION
416-03085 3085 Spindle Boot Replaces Front/Rear Spindle Boots
on 3000/4000 Spindle Boot Lathes.
Damaged Boots Should be Replaced
to Protect the Spindle and Bearings
From Metal Chips and Grinding Dust.
Replaces Discontinued Spindle Boot
10401 on Models 4100 and 7700
416-03086 3086 Feed Screw
Boot
Used on Lathes 3000,
4000 and 7000
416-03087 3087 Cross Feed Boot Used on Lathes 3000, 4000,
4100, 7000, 7700
416-03148 3148 Oil Level Stick Standard on Lathes 3000,
4000, 4100, 7000, 7700
416-04282 4282 Bearing
Protector
416-06936 6936 Cross Feed
Extension
416-07996 7996 Shear Gear
and C-Clip
Mounts Between the Lathe and
the Drum or Rotor, on the Arbor,
to Keep Chips and Grinding
Dust Out of the Hub. Fits any
Arbor up to 2.25" (57.15mm)
To Relocate the No. 6900 Twin
Cutter on 4000 & 4100 Lathes to
Accommodate Rotor Diameters
up to 17-15/16" (455.61mm)
Replacement for the “Fail Safe"
Gear. Protects Cross Feed Gear
Box in the Event of Operator
Error during Rotor Machining
416-09590 9590 Spindle Lock Kit Parts Needed to Easily Add a Spindle
Lock to an Older Drum/Disc Lathe
that Does Have this Feature
416-23682 23682 Spindle Ring For Replacing a Rubber Boot on
the Front of the Spindle in Order
to Mount the Boot to the Spindle
417-02760 2760 Mechanical
Rotor
Micrometer
417-02761 2760-50 Mechanical
Metric Rotor
Micrometer
417-02780 2780 Digital Rotor
Micrometer
417-02781 9K85452780 Digital Rotor
Micrometer
417-08500 8500 Brake Drum
Micrometer
417-08501 8500-50 Metric
Brake Drum
Micrometer
417-08539 8539 Micrometer
Extension Shaft
417-08545 8545 Digital Drum
Micrometer
Range: 0 to 2.25". English
& Metric Display
Range: 0 to 60.9mm.
English & Metric Display
Deep Throat Design Allows
Measurement Within Rotor Brake
Surfaces. For Checking Rotor Wear,
Thickness Variation, and Depth of
Scoring. For All Automotive and
Truck Applications. Range: 0 to 2.4"
Range 0"-2.4"
Measures Drum Diameters On or Off
the Lathe. Can be Used to Check
Out-of-Roundness. Dial is Graduated
by 0.005". Range: 6" to 16.125"
Graduated By 0.1mm. Range:
154mm to 406mm
Increases 8500 Micrometer
Range to 6" to 26"
Range 5"-15". Stands up in Drum
417-09582 9582 Checking Gauge For Brake Drums
417-85391 8539-50 Micrometer
Extension Shaft
417-94127 941270 Three Jaw
Chuck
Increases 8500-50 Micrometer Range
From 152.44mm to 660.40mm
Heavy Duty Three Jaw
Chuck for 1-7/8" Arbor
416-03085 416-03086 416-03087
416-03148
416-04282
416-06936
416-07996
416-09590
416-02780 417-94127
417-08545
BUYER'S GUIDE
ASCOT SUPPLY CORPORATION
SUPPLY CORPORATION