2018 Ascot Buyer's Guide_compressed

324
SERVICE EQUIPMENT // BRAKE LATHES
Brake Lathe Accessories
Brake Lathe Accessories & Adapters (cont.)
SERVICE EQUIPMENT // BRAKE LATHES
1” CENTERING CONE SET
• For mounting some
splined hubbed drums and
some drums and rotors
with unusual hub designs
• Standard with Models 2002,
3000, 4000, 4100, 7000 and
7700 lathes • CONSISTS OF:
One No. 3902 centering cone;
one No. 3903 centering cone
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-03900 3900 1" Centering Cone Set 1 lb., 2.5 Oz.
1” SPLINED HUB ADAPTER SET
• Used to mount rear drums
and some rotors with splined
hubs on 1" arbors, such as:
Subaru front rotors, Subaru 4
x 4 drums and older VW
drums • May also be
used as spacer
416-03900
416-05795
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-05795 5795 1" Splined Hub Adapter Set 6 Oz.
CLAMPING PLATE SET
• Used with No. 8800 hubless
rotor adapter set to
quickly and easily mount
Chrysler, Ford and GM
automotive composite
rotors • Clamping plates
apply clamping pressure
to the rotor centers
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-08888 8888 Clamping Plate Set. INCLUDES: 2 14 lbs.
Clamping Plates, 2 Locating Rings
416-08889 8889 Clamping Plate Set. INCLUDES:
2 Clamping Plates, 1 Locating
Rings, For Light Truck
18 lbs.
1" DOUBLE TAPER ADAPTER TRUCK SET
• For mounting larger hubbed drums and rotors on
1" arbors • Fits bearing face diameters from 2.828" to
3.560" (71.83 to 90.42mm) • Some Ford and Chrysler
truck drums and many Ford 4 x 4 front rotors require
two No. 9195 double taper adapters • INCLUDES: One
No. 9195 1" double taper adapter 2.828" x 3.185" and
one No. 9196 1" double taper adapter 3.203" 3.560"
416-08888
HUBLESS ROTOR ADAPTER SET
• Easiest, fastest hubless rotor mounting
available • Used on 1" arbors to mount rigidcenter
hubless rotors • Centering cone easily
locates and solidly clamps hubless rotors
against the rugged faceplate for fast, accurate
mounting with minimal chatter • Can also
mount Chrysler, Ford and GM composite
rotors with the optional No.
8888 clamping plate set for
automotive composite
rotors and the No.
8889 clamping plate
set for light truck
composite rotors
416-09233
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-09233 9233 1" Double Taper Adapter Truck Set 8 lb., 8 Oz.
SELF-ALIGNING SPACER
• Prevents arbor distortion when properly tightening 1"
arbor nuts • Standard with all Ammco automotive lathes
416-08800
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-08800 8800 Hubless Rotor Adapter Set 18 lbs.
416-09492
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-09492 9492 Self-Aligning Spacer 11 Oz.
BUYER'S GUIDE
ASCOT SUPPLY CORPORATION
SUPPLY CORPORATION