2018 Ascot Buyer's Guide_compressed

More documents

Recommendations

Info

344 WHEEL BALANCING // PASSENGER CAR WHEEL WEIGHTS The Importance of Wheel Balancing Why Balance? WHEEL BALANCING // PASSENGER CAR WHEEL WEIGHTS Balancing is an important part of your tire service. Whether you are getting new tires, or having your tires rotated, you should get a rebalance each time your wheel comes off of your vehicle. The main reasons for balancing are comfort and tire wear. COMFORT Vehicles are being made lighter and lighter. The heavier cars of yesterday actually helped smooth out the ride by dampening many vibrations before the driver could feel them. The softer suspensions also had the same effect. Another factor is tire technology. Generally, more responsive tires with lower profiles (which send more road feedback to the driver) are being used in today’s market. As a result, the slightest imbalance can be felt in most vehicles. For those of you who have larger tires and wheels, balancing is even more critical. TIRE WEAR Over the miles you drive, turning, hitting bumps and holes, and driving down uneven road surfaces have led to uneven tread wear on your tires. Perhaps a pothole has knocked-out your vehicle’s alignment which creates uneven tire wear. Besides rotating the tires and getting an alignment to set things right, you should also rebalance the tires. Even if you can’t feel vibrations, they are present. The uneven tread wear has created an imbalance that generates excessive heat and wear on your tires. Considering the hundreds of dollars you spent on your tires, a rebalance will extend the life of your tires. WHEEL WEIGHTS: AN OVERVIEW Wheel weights have historically been made of lead. Over the last decade, there has been pressure put on the tire industry to use wheel weights made from materials other than lead. Two materials with very different characteristics have become the most popular alternatives to lead; steel and zinc. • LEAD has historically been used to manufacture wheel weights because it has distinct characteristics. Lead is very dense, soft, and relatively inexpensive. It is also simple and inexpensive to manufacture using a mold because of its low melting point, and viscosity while in a molten state. Concerns over the dangers of lead have caused some states to ban the use of lead wheel weights. The EPA has already accepted a petition to ban the use of lead wheel weights in the United States, but they have yet to announce a time table or their actual rules. • LEAD-FREE weights are more rigid and less dense than the lead weights we are used to. This results in the necessity more than ever to use the proper application at all times rather than only one or two styles. Please ask your representative for a rim gauge or application chart. • STEEL has become the replacement material of choice for almost all of the OEM’s and national tire retailers. Steel has proven itself to be non-toxic, 100% recyclable, and the most prevalent material in the automotive industry. • ZINC has also become a viable replacement to lead wheel weights. A zinc wheel weight is manufactured in a similar process to lead weights. Although a zinc weight has an appearance similar to that of lead, it is important to use the entire range of series for successful balancing. There are also new emerging technologies such as PlaSteel which combine the benefits of both lead-free alternatives to provide a more user friendly alternative to lead. BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION
PASSENGER CAR WHEEL WEIGHTS // WHEEL BALANCING 345 Zinc and Steel Wheel Weights Passenger Car Wheel Weights (cont.) MC/ALCMC TYPE APPLICATIONS - MC/ALCMC SERIES FORD: All from1985; CHRYSLER: All from 1990 to 1997; some models changed to LHS in 1998; GM: Increasingly used starting in 1988; as of 2000 only C5 Corvette remains AWS AW/ALC TYPE APPLICATIONS - AW/ALC SERIES FORD: All up to 1984; CHRYSLER: All up to 1989; GM: All up to 1987; decreasingly used from 1988-2000 STEEL ASCOT NO. QUANTITY: 25 per box STEEL Plombco PLOMBCO MCZS SERIES NO. Perfect Perfect PERFECT MCZ SERIES NO. WEIGHT MC/ALCMC: ZINC 488-28025 MCZS-0.25 MC025Z .25 Oz. 488-28050 MCZS-0.50 MC050Z .50 Oz. 488-28075 MCZS-0.75 MC075Z .75 Oz. 488-28100 MCZS-1.00 MC100Z 1.00 Oz. 488-28125 MCZS-1.25 MC125Z 1.25 Oz. 488-28150 MCZS-1.50 MC150Z 1.50 Oz. 488-28175 MCZS-1.75 MC175Z 1.75 Oz. 488-28200 MCZS-2.00 MC200Z 2.00 Oz. 488-28225 MCZS-2.25 MC225Z 2.25 Oz. 488-28250 MCZS-2.50 MC250Z 2.50 Oz. 488-28275 MCZS-2.75 MC275Z 2.75 Oz. 488-28300 MCZS-3.00 MC300Z 3.00 Oz. STEEL ASCOT NO. QUANTITY: 25 per box STEEL Plombco PLOMBCO AWZS SERIES NO. Perfect PERFECT AWZ SERIES NO. Perfect WEIGHT AW/ALC: ZINC 488-78025 AWZS-0.25 AW025Z .25 Oz. 488-78050 AWZS-0.50 AW050Z .50 Oz. 488-78075 AWZS-0.75 AW075Z .75 Oz. 488-78100 AWZS-1.00 AW100Z 1.00 Oz. 488-78125 AWZS-1.25 AW125Z 1.25 Oz. 488-78150 AWZS-1.50 AW150Z 1.50 Oz. 488-78175 AWZS-1.75 AW175Z 1.75 Oz. 488-78200 AWZS-2.00 AW200Z 2.00 Oz. 488-78225 AWZS-2.25 AW225Z 2.25 Oz. 488-78250 AWZS-2.50 AW250Z 2.50 Oz. 488-78275 AWZS-2.75 AW275Z 2.75 Oz. 488-78300 AWZS-3.00 AW300Z 3.00 Oz. WHEEL BALANCING // PASSENGER CAR WHEEL WEIGHTS Plombco Plasteel Bada Plombco Plasteel Bada ASCOT NO. PERFECT MCST SERIES NO. BADA MCFE SERIES NO. ASCOT NO. (FOR PLOMBCO PLASTEEL SERIES) PLOMBCO PLASTEEL SERIES NO. WEIGHT MC/ALCMC: STEEL 488-29025 MC025ST MCFE025 488-56025 MCPS-0.25 .25 Oz. 488-29050 MC050ST MCFE050 488-56050 MCPS-0.50 .50 Oz. 488-29075 MC075ST MCFE075 488-56075 MCPS-0.75 .75 Oz. 488-29100 MC100ST MCFE100 488-56100 MCPS-1.00 1.00 Oz. 488-29125 MC125ST MCFE125 488-56125 MCPS-1.25 1.25 Oz. 488-29150 MC150ST MCFE150 488-56150 MCPS-1.50 1.50 Oz. 488-29175 MC175ST MCFE175 488-56175 MCPS-1.75 1.75 Oz. 488-29200 MC200ST MCFE200 488-56200 MCPS-2.00 2.00 Oz. 488-29225 MC225ST MCFE225 488-56225 MCPS-2.25 2.25 Oz. 488-29250 MC250ST MCFE250 488-56250 MCPS-2.50 2.50 Oz. 488-29275 MC275ST MCFE275 488-56275 MCPS-2.75 2.75 Oz. 488-29300 MC300ST MCFE300 488-56300 MCPS-3.00 3.00 Oz. QUANTITY: 25 per box ASCOT NO. PERFECT AWST SERIES NO. BADA ALFE SERIES NO. ASCOT NO. (FOR PLOMBCO PLASTEEL SERIES) PLOMBCO PLASTEEL SERIES NO. WEIGHT AW/ALC: STEEL 488-77025 AW025S ALFE025 488-51025 AWPS-0.25 .25 Oz. 488-77050 AW050ST ALFE050 488-51050 AWPS-0.50 .50 oz 488-77075 AW075ST ALFE075 488-51075 AWPS-0.75 .75 Oz. 488-77100 AW100ST ALFE100 488-51100 AWPS-1.00 1.00 Oz. 488-77125 AW125ST ALFE125 488-51125 AWPS-1.25 1.25 Oz. 488-77150 AW150ST ALFE150 488-51150 AWPS-1.50 1.50 Oz. 488-77175 AW175ST ALFE175 488-51175 AWPS-1.75 1.75 Oz. 488-77200 AW200ST ALFE200 488-51200 AWPS-2.00 2.00 Oz. 488-77225 AW225ST ALFE225 488-51225 AWPS-2.25 2.25 Oz. 488-77250 AW250ST ALFE250 488-51250 AWPS-2.50 2.50 Oz. 488-77275 AW275ST ALFE275 488-51275 AWPS-2.75 2.75 Oz. 488-77300 AW300ST ALFE300 488-51300 AWPS-3.00 3.00 Oz. QUANTITY: 25 per box SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE
Page 1 and 2:
BUYER’S GUIDE YOUR ONE SOURCE FOR
Page 3 and 4:
JACKS // LIFTING EQUIPMENT 1 RPG 3
Page 5 and 6:
TIRE CAGES // TIRE & WHEEL SERVICE
Page 7 and 8:
HYDRAULIC PUMPS // TIRE & WHEEL SER
Page 9 and 10:
RPG AIR TOOLS // AIR TOOLS 7 Impac
Page 11 and 12:
WHAT'S INSIDE THE BUYER'S GUIDE //
Page 13 and 14:
WHAT'S INSIDE THE BUYER'S GUIDE //
Page 15 and 16:
Air Systems Air Compressors | Drye
Page 17 and 18:
THE BASICS // AIR SYSTEMS Compress
Page 19 and 20:
AIR COMPRESSORS & DRYERS // AIR SYS
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Ingersoll Rand Air Compressors AIR
Page 33 and 34:
Page 35 and 36:
NITROGEN TIRE FILLING SYSTEMS // AI
Page 37 and 38:
AIR PREPARATION PRODUCTS // AIR SYS
Page 39 and 40:
AIR PREPARATION PRODUCTS // AIR SYS
Page 41 and 42:
AIR HOSES, HOSE REELS & HOSE PRODUC
Page 43 and 44:
AIR HOSES, HOSE REELS & HOSE PRODUC
Page 45 and 46:
AIR LINE COUPLERS, PLUGS & ACCESSOR
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Air Tools Impact Wrenches | Sander
Page 55 and 56:
IMPACT WRENCHES (CP) // AIR TOOLS
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
RPG AIR TOOLS // AIR TOOLS Impact
Page 63 and 64:
RPG AIR TOOLS // AIR TOOLS Air Dri
Page 65 and 66:
SANDERS & AIR RATCHETS (CP) // AIR
Page 67 and 68:
BUFFERS, GRINDERS, DRILLS & ACCESSO
Page 69 and 70:
BUFFERS, GRINDERS, DRILLS & ACCESSO
Page 71 and 72:
IMPACT WRENCHES (IR) // AIR TOOLS
Page 73 and 74:
IMPACT WRENCHES (IR) // AIR TOOLS
Page 75 and 76:
GRINDERS, BUFFERS, SANDERS & DRILLS
Page 77 and 78:
ACCESSORIES // AIR TOOLS Air Tool
Page 79 and 80:
Wheel Service Products Impact Sock
Page 81 and 82:
Supply Corporation IMPACT SOCKETS /
Page 83 and 84:
Supply Corporation IMPACT SOCKETS /
Page 85 and 86:
IMPACT SOCKETS // WHEEL SERVICE PRO
Page 87 and 88:
WHEEL TORQUE PRODUCTS // WHEEL SERV
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
SUPPLY CORPORATION WHEEL TORQUE PRO
Page 95 and 96:
LOOSE NUT PREVENTION // WHEEL SERVI
Page 97 and 98:
LOOSE NUT PREVENTION // WHEEL SERVI
Page 99 and 100:
WHEEL CENTERING PRODUCTS // WHEEL S
Page 101 and 102:
LUG NUT REMOVAL PRODUCTS // WHEEL S
Page 103 and 104:
LUG NUT REMOVAL PRODUCTS // WHEEL S
Page 105 and 106:
WHEEL ATTACHING HARDWARE // WHEEL S
Page 107 and 108:
WHEEL ATTACHING HARDWARE // WHEEL S
Page 109 and 110:
TIRE & WHEEL SERVICE TOOLS // WHEEL
Page 111 and 112:
TIRE & WHEEL SERVICE TOOLS // WHEEL
Page 113 and 114:
Lifting Equipment Jacks | Jack Sta
Page 115 and 116:
® JACKS // LIFTING EQUIPMENT 113
Page 117 and 118:
JACKS // LIFTING EQUIPMENT 115 RPG
Page 119 and 120:
JACKS // LIFTING EQUIPMENT 117 WIN
Page 121 and 122:
JACKS // LIFTING EQUIPMENT 119 Mag
Page 123 and 124:
JACKS // LIFTING EQUIPMENT Service
Page 125 and 126:
JACKS // LIFTING EQUIPMENT Service
Page 127 and 128:
JACKS // LIFTING EQUIPMENT Hydraul
Page 129 and 130:
JACKS // LIFTING EQUIPMENT 127 Ser
Page 131 and 132:
JACKS // LIFTING EQUIPMENT 129 Ser
Page 133 and 134:
JACKS // LIFTING EQUIPMENT 131 Hig
Page 135 and 136:
JACKS // LIFTING EQUIPMENT 133 RPG
Page 137 and 138:
JACKS // LIFTING EQUIPMENT 135 Jac
Page 139 and 140:
JACKS // LIFTING EQUIPMENT 137 For
Page 141 and 142:
® JACKS // LIFTING EQUIPMENT 139
Page 143 and 144:
JACKS // LIFTING EQUIPMENT 141 Tra
Page 145 and 146:
WHEEL DOLLIES // LIFTING EQUIPMENT
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
HYDRAULIC SHOP PRESSES // LIFTING E
Page 153 and 154:
SHOP CRANES // LIFTING EQUIPMENT 15
Page 155 and 156:
BRAKE DRUM HANDLERS // LIFTING EQUI
Page 157 and 158:
Tire & Wheel Service Lubricants |
Page 159 and 160:
Keeping You Moving BB9LM NEW Perfec
Page 161 and 162:
TIRE SERVICE SUPPLIES // TIRE & WHE
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
BEAD BREAKERS, BEAD SEATING DEVICES
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
CHLORIDE PUMPS // TIRE & WHEEL SERV
Page 185 and 186:
CHLORIDE PUMPS // TIRE & WHEEL SERV
Page 187 and 188:
MOUNT/DEMOUNT TOOLS // TIRE & WHEEL
Page 189 and 190:
R MOUNT/DEMOUNT TOOLS // TIRE & WHE
Page 191 and 192:
R TIRE SERVICING TOOLS // TIRE & WH
Page 193 and 194:
TIRE SERVICING TOOLS // TIRE & WHEE
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
SAFETY INFLATION CAGES // TIRE & WH
Page 201 and 202:
SAFETY INFLATION CAGES // TIRE & WH
Page 203 and 204:
Valve Hardware TPMS Tools & Access
Page 205 and 206:
SUPPLY CORPORATION ASCOT SUPPLY COR
Page 207 and 208:
TPMS BEST PRACTICES Always test BEF
Page 209 and 210:
TPMS TOOLS // VALVE HARDWARE 207 T
Page 211 and 212:
TPMS TOOLS // VALVE HARDWARE 209 B
Page 213 and 214:
TPMS TOOLS // VALVE HARDWARE 211 W
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
TPMS TOOLS // VALVE HARDWARE 219 V
Page 223 and 224:
TPMS TOOLS // VALVE HARDWARE 221 Su
Page 225 and 226:
Page 227 and 228:
TPMS TOOLS // VALVE HARDWARE 225 I
Page 229 and 230:
TPMS TOOLS // VALVE HARDWARE 227 Su
Page 231 and 232:
TPMS TOOLS // VALVE HARDWARE Schra
Page 233 and 234:
TPMS TOOLS // VALVE HARDWARE Dill
Page 235 and 236:
TPMS TOOLS // VALVE HARDWARE 233 H
Page 237 and 238:
TPMS TOOLS // VALVE HARDWARE 235 S
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
VALVES & VALVE TOOLS // VALVE HARDW
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
PT Valve System VALVES & VALVE TOOL
Page 265 and 266:
Page 267 and 268:
Tire Gauges & Chucks TIRE GAUGES &
Page 269 and 270:
TIRE GAUGES & CHUCKS // VALVE HARDW
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Inflator Gauges INFLATOR GAUGES //
Page 279 and 280:
INFLATOR GAUGES // VALVE HARDWARE 2
Page 281 and 282:
VALVE HARDWARE // TIRE GAUGES & CHU
Page 283 and 284:
Service Equipment Tire Changers |
Page 285 and 286:
TIRE CHANGERS // SERVICE EQUIPMENT
Page 287 and 288:
The Coats ® GTS-Series TIRE CHANGE
Page 289 and 290:
The Coats ® RC-Series RC-45 & RC-5
Page 291 and 292:
Page 293 and 294:
Page 295 and 296: TIRE CHANGERS // SERVICE EQUIPMENT
Page 303 and 304: WHEEL BALANCERS // SERVICE EQUIPMEN
Page 321 and 322: BRAKE LATHES // SERVICE EQUIPMENT 3
Page 331 and 332: Tool Bits/Carbide Inserts QUICK REF
Page 333 and 334: LIFTS & ROLLING JACKS // SERVICE EQ
Page 341 and 342: Wheel Balancing Supplies 339 Passe
Page 343 and 344: PASSENGER CAR WHEEL WEIGHTS // WHEE
Page 345: PASSENGER CAR WHEEL WEIGHTS // WHEE
Page 349 and 350: PASSENGER CAR WHEEL WEIGHTS // WHEE
Page 351 and 352: TRUCK WHEEL WEIGHTS // WHEEL BALANC
Page 353 and 354: TRUCK WHEEL WEIGHTS // WHEEL BALANC
Page 355 and 356: ADHESIVE WHEEL WEIGHTS // WHEEL BAL
Page 363 and 364: WHEEL WEIGHT KITS // WHEEL BALANCIN
Page 365 and 366: WHEEL WEIGHT TOOLS // WHEEL BALANCI
Page 367 and 368: WHEEL WEIGHT TOOLS // WHEEL BALANCI
Page 369 and 370: TIRE BALANCING COMPOUNDS // WHEEL B
Page 371 and 372: TIRE BALANCING COMPOUNDS // WHEEL B
Page 373 and 374: Alignment Camber/Caster Tools | Li
Page 375 and 376: PASSENGER CAR ALIGNMENT // ALIGNMEN
Page 377 and 378: CAMBER/CASTER TOOLS // ALIGNMENT L
Page 385 and 386: CAMBER/CASTER TOOLS // ALIGNMENT C
Page 387 and 388: CAMBER/CASTER TOOLS // ALIGNMENT H
Page 389 and 390: ALIGNMENT TOOLS & SYSTEMS // ALIGNM
Page 395 and 396: Automotive & Fleet Service Equipmen
Page 397 and 398:
BATTERY CHARGERS & TESTERS // AUTO
Page 399 and 400:
SERVICE EQUIPMENT // AUTO & FLEET S
Page 401 and 402:
EXHAUST HOSES, EXHAUST EXTRACTION /
Page 403 and 404:
SHOP TOOLS, SUPPLIES & EQUIPMENT //
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
LUBRICATION EQUIPMENT // AUTO & FLE
Page 419 and 420:
LUBRICATION EQUIPMENT // AUTO & FLE
Page 421 and 422:
SAFETY PRODUCTS // AUTO & FLEET SER
Page 423 and 424:
MECHANIC'S EQUIPMENT // AUTO & FLEE
Page 425 and 426:
Fluid Exchange Refrigerant Handlin
Page 427 and 428:
REFRIGERANT HANDLING SYSTEMS // FLU
Page 429 and 430:
REFRIGERANT HANDLING SYSTEMS // FLU
Page 431 and 432:
Tire Repair Materials 429 Cabinet
Page 433 and 434:
TIRE REPAIR CABINETS & KITS // TIRE
Page 435 and 436:
TIRE CEMENTS, SEALANTS & PATCHES //
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Page 453 and 454:
Page 455 and 456:
Page 457 and 458:
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
MONAFLEX TIRE REPAIR SYSTEM // TIRE
Page 465 and 466:
AIR TOOLS // TIRE REPAIR 463 Tire
Page 467 and 468:
TIRE REPAIR TOOLS & ACCESSORIES //
Page 469 and 470:
Page 471 and 472:
Supply Corporation TIRE REPAIR TOOL
Page 473 and 474:
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
TIRE SPREADERS & REPAIR STATIONS //
Page 481 and 482:
Page 483 and 484:
Page 485 and 486:
Retreading Rasp Blades & Spacers |
Page 487 and 488:
RASP BLADES & SPACERS // RETREADING
Page 489 and 490:
BLADE MATCHING GUIDE BLADE MATCHING
Page 491 and 492:
RASP BLADES & SPACERS // RETREADING
Page 493 and 494:
RETREAD ACCESSORIES // RETREADING 4
Page 495 and 496:
RETREAD ACCESSORIES // RETREADING 4
Page 497 and 498:
RETREAD CONSUMABLES // RETREADING 4
Page 499 and 500:
TIRE APPEARANCE // RETREADING 497
Page 501 and 502:
ENVELOPES // RETREADING 499 Pre-Cu
Page 503 and 504:
MILLIMETERS, DECIMALS & INCHES // M
Page 505 and 506:
ALPHABETICAL // INDEX 503 22 & 25-T
Page 507 and 508:
ALPHABETICAL // INDEX 505 Balcrank
Page 509 and 510:
ALPHABETICAL // INDEX 507 Dill Digi
Page 511 and 512:
ALPHABETICAL // INDEX 509 Hand Bend
Page 513 and 514:
ALPHABETICAL // INDEX 511 Lug Lock
Page 515 and 516:
ALPHABETICAL // INDEX 513 Premium I
Page 517 and 518:
ALPHABETICAL // INDEX 515 Small Tir
Page 519 and 520:
ALPHABETICAL // INDEX 517 Tube Repa
Page 521 and 522:
NUMERICAL // INDEX 519 114-75302___
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
Page 547 and 548:
STAND ALONE TPMS SERVICE TS508 FULL
show all

2018 Ascot Buyer&#039;s Guide_compressed

Create successful ePaper yourself

Delete template?

Save as template?

2018 Ascot Buyer's Guide_compressed