2018 Ascot Buyer's Guide_compressed

WHEEL BALANCERS // SERVICE EQUIPMENT 305
Coats ® Wheel Balancers
SOMETIMES THE HOLE ISN'T THE CENTER
Aftermarket and a few OE wheels are designed to that one model can fit many brands of vehicles. To do this,
they enlarge the middle hole and center off the bolts. These wheels are called LUG-CENTRIC or BOLT-CENTRIC.
It is critical for accurate balancing that the wheel centers on the balancer the way it centers of the car.
HUB-CENTRIC
A: Fixed Finger
Plates
• Each plate is set to one
size and locked • Offers
fast set up on the balancer
• Ideal for very high
volume shops with a full
set or get just a few plates
for fleet applications
B: Stud Plates
• Each plate is set to one
size and locked • Plates
are bolted to the wheel
and the assembly is
mounted on the balancer
• Used when maximum
accuracy is needed
LUG-CENTRIC
C: Adjustable
Pin Plates
• Most consistent method
for providing accurate
mountings for a wide variety
of tire and wheel assemblies
• Adjustable design provides
fast and easy clamping of
tire and wheel assemblies
• Lug clamping and centering
of tire and wheel assembly
prevents damage to alloy
wheels • Can be used on
any 40mm wheel balancer
D: Shadow Board
• Gets adapters up off the
floor • Easy to see and select
• Position where you need
it for when you need it
SERVICE EQUIPMENT // WHEEL BALANCERS
LOW PROFILE HEAVY
DUTY SPINNER
• Allows for easy
access under today’s
lower body style cars
and trucks • Completely
portable, this heavy duty
spinner will handle passenger
cars and heavy duty truck tires,
including rear wheels and drive
duals • Available in 7.5 HP, 220 Volt,
3 Phase or 5 HP, 220 Volt, Single Phase
481-00525
ASCOT NO. MFG. NO. DESCRIPTION
481-00525 525 Low Profile Heavy Duty Spinner
PORTABLE
ELECTRONIC
STROBE BALANCER
• Companion to the Model
525 spinner • Delivers
fast precision
balancing on-thevehicle
• No special
wheel attachments
are required • The
flashing strobe indicator
pin-points exact placement
of wheel weights • 110-115 Volt 481-00501
ASCOT NO. MFG. NO. DESCRIPTION
481-00501 501A Electronic Strobe Balancer
SUPPLY CORPORATION
ASCOT SUPPLY CORPORATION
BUYER'S GUIDE