RE10TC Temperature Control Module Operating manual
RE10TC Temperature Control Module Operating manual
RE10TC Temperature Control Module Operating manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Details of the set values Buffer Memory<br />
3.3.18 Monitoring of limits ON/OFF (BFM #342 to BFM #345)<br />
The monitoring of each limit or warning value can be selected ON or OFF.<br />
BFM #342: Monitoring of lower limits ON/OFF<br />
BFM #343: Monitoring of upper limits ON/OFF<br />
BFM #344: Monitoring of lower warning values ON/OFF<br />
BFM #345: Monitoring of upper warning values ON/OFF<br />
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0<br />
<strong>Control</strong>ler<br />
10 9 8 7 6 5 4 3 2 1<br />
Fig. 3-16: Selection of limits and warnings<br />
3.3.19 Monitoring of heating currents ON/OFF (BFM #347)<br />
This address is used to select the controller for which the heating current is to be monitored.<br />
BFM #347: Monitoring of heating current ON/OFF<br />
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0<br />
<strong>Control</strong>ler<br />
10 9 8 7 6 5 4 3 2 1<br />
Fig. 3-14: Contents of buffer memory address 347<br />
3.3.20 Watchdog (BFM #348)<br />
Bit = 1: Monitoring ON<br />
Bit = 0: Monitoring OFF<br />
TC00025C<br />
Bit 0 in BFM #348 is set by the <strong>RE10TC</strong>. By resetting the bit in the sequence program of the PLC<br />
and checking that the bit has been switched ON again, the operation of the <strong>RE10TC</strong> can be confirmed.<br />
BFM #348: Watchdog<br />
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0<br />
Fig. 3-15: Watchdog flag in buffer memory address 348<br />
1<br />
Bit = 1: Monitoring ON<br />
Bit = 0: Monitoring OFF<br />
Bit 0 is set by the <strong>RE10TC</strong><br />
TC00023C<br />
TC00026C<br />
3-22 MITSUBISHI ELECTRIC
Change language