Views
5 years ago

RSU-503 Redundancy Switch Unit Installation ... - Comtech EF Data

RSU-503 Redundancy Switch Unit Installation ... - Comtech EF Data

Installation RSU-503 Redundancy Switch Unit 2.2 Inspecting the Equipment 1. Carefully check the equipment for damage incurred during shipment. 2. Carefully check the equipment against the packing list shipped with the equipment to ensure that the shipment is complete. Refer to the following paragraphs. 2.2.1 Included Parts Note: Parts are not drawn to scale. Qty. Description Qty. Description 1 RSU-503. 1 Installation and operation manual. Note: The installation hardware listed below is included in the redundant system installation parts kit KT/3577. Qty. Description Qty. Description 1 Spar support bracket. 4 5/16-18 x 1” bolt. EFData Part # FP/3175. Used for spar mount only. 2 Unistrut — 14” long. EFData Part # FP/3595. 6 5/16-18 hex nut. EFData Part # HW/5/16-18HEXNT. EFData Part # HW/5/16-18X1BLT. 10 5/16” split lockwasher. EFData Part # HW/5/16-SPLIT. 10 5/16” flat washer. EFData Part # HW/5/16-FLT. 2 Rev. 8

RSU-503 Redundancy Switch Unit Installation 4 Pipe block. EFData Part # HW/BLK-PIPE2-8. Used for round pole mount only. 2 Threaded rod, 5/16-18 x 14”. EFData Part # HW/RD5/16-18X14. Used for round and square pole mount only. 3 1/4-20 x 1” bolt. EFData Part # 03P1079. 3 1/4” split lockwasher. EFData Part # HW/1/4-SPLIT. 6 5/16-18 spring nut. EFData Part # HW/5/16-18SPNUT. 4 Flat fitting plate, 5/16”. EFData Part # HW/FIT-PLT-5/16. 3 1/4” flat washer. EFData Part # O4P1022. Rev. 8 3

Software Installation and Licensing ... - Comtech EF Data
Converters MBT-5000 & MBT-5003 L-Band Up ... - Comtech EF Data