CONNECTIONS_66-e
Specialist Magazine CONNECTIONS no. 66
Specialist Magazine CONNECTIONS no. 66
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
«In building automation, the combination of LAN, SPE and Ethernet/IP is long-term,<br />
application-neutral, cost-effective, and energy-saving.»<br />
SPE switch<br />
Power<br />
control<br />
device<br />
SPE switch<br />
SPE no SPoE<br />
63171-1<br />
terminal<br />
63171-1<br />
terminal<br />
SPE<br />
device<br />
63171-1<br />
terminal<br />
SPE<br />
device<br />
SPE w. SPoE<br />
SPE media<br />
converter<br />
SPE media<br />
converter<br />
RJ45<br />
terminal<br />
050.74<strong>66</strong><br />
Power supply<br />
RJ45<br />
SPE<br />
Legacy<br />
RJ45 device<br />
The concept of the all-in-one SPE solution from R&M and Zemfyre<br />
Legacy<br />
RJ45 device<br />
Legacy<br />
RJ45 device<br />
100 m zone 200-500 m zone 600 m zone<br />
SPE solution for buildings<br />
The R&M and Zemfyre SPE extended LAN<br />
system is suitable for connecting IP devices<br />
with a low data rate over large distances in<br />
buildings and industrial plants. Application<br />
examples:<br />
– Surveillance cameras in remote locations<br />
– Remote access control and gates<br />
– Intercom systems<br />
– Sensors and displays in large buildings,<br />
e.g. parking garages, warehouses<br />
The active equipment for the R&M and Zemfyre SPE extended LAN system:<br />
But this is not a must, as the R&M system<br />
can provide the power supply from the<br />
switch. The technology for remote power<br />
supply via SPE cabling is called Power over<br />
Data Line (PoDL). In PoDL applications, the<br />
transmission range is reduced to 200 to 500<br />
meters depending on the required infeed<br />
power. Until SPE devices become available,<br />
conventional PoE-compatible devices can<br />
also be used by means of an SPE-RJ45 media<br />
converter.<br />
030.8734<br />
SPE Media Converter<br />
ZEM111LP<br />
– 2-port media converter from SPE to<br />
RJ45 for connecting PoE devices<br />
– Power input either by local power supply<br />
or by PoDL from ZEM601L<br />
030.8735<br />
SPE Switch<br />
ZEM601L<br />
– Secure unmanaged SPE switch<br />
– Input 2x 10/100Base-Tx, output<br />
4x 10Base-T1L, PoDL connectable<br />
– External power supply or via PoDL<br />
controller<br />
With this overall system, the SPE technology<br />
can be used without delay. You can find<br />
everything you need to know about SPE here:<br />
Camera<br />
030.8737<br />
ZVD511LP<br />
– Industrial 5MP surveillance camera with<br />
10Base-T1L SPE connectivity<br />
– Powered by PoDL (Class 14),<br />
1x IEC 63171-1 connector<br />
030.8740<br />
SPE PoDL Controller<br />
ZPC400<br />
– 4-channel PoDL controller for ZEM601L<br />
– Allows PoDL power to be supplied to the<br />
4 SPE ports in the ZEM 601L<br />
050.7067<br />
Matthias Gerber<br />
Market Manager LAN Cabling<br />
matthias.gerber@rdm.com<br />
04|2024–<strong>66</strong> <strong>CONNECTIONS</strong> | 21
Change language