alpha bs

ABB i-bus ® KNX
Product Article-No. Order-No. Pack/Qty
Blind actuator module 1 )
2-gang, 230 V AC
Module for insertion into the basic room controller unit.
It controls two independent blind or roller shutter drives at
115/230 V AC.
Special functions: Positioning and automatic sun protection
function
Rated voltage: 230 V
Rated frequency: 50 Hz
Outputs: 2x Change-over switch
Suitable for: AC1
Rated current: 6 A
Protection class (Device): IP 20
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
JA/M 2.2 30.1 2CDG110003R0011
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
Blind actuator module 1 )
2-gang, 24 V DC
Module for insertion into the basic room controller unit.
It controls two independent blind or roller shutter drives
at 24 V DC.
Special functions: Positioning and automatic sun protection
function
Rated voltage: 24 V
Outputs: 2x Change-over switch
Suitable for: DC
Rated current: 6 A
Protection class (Device): IP 20
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
JA/M 2.2 4.1 2CDG110004R0011
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
Switch/dimmer actuator module 1 )
2-gang, 6 A
Module for insertion into the basic room controller unit.
It enables the switching and dimming of two lamp groups
in conjunction with electronic ballast units of 1 to 10 V
control voltage.
Rated voltage: 230 V
Rated frequency: 50 Hz
Outputs: 2x Normally open contact, potential free
Suitable for: AC1
Rated current: 6 A
Output voltage: 230 V~
Protection class (Device): IP 20
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
SD/M 2.6.1 2CDG110010R0011
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
Technical information
www.BUSCH-JAEGER-catalogue.com
Product Article-No. Order-No. Pack/Qty
Light regulating module 1 )
1-gang, 6 A
Module for insertion into the basic room controller unit.
It permits the switching and dimming of a lamp group of 1
to 10 V control voltage.
In conjunction with a LF/U 1.1 light sensor, the device can
be used for constant light regulation.
Rated voltage: 230 V
Rated frequency: 50 Hz
Outputs: 1x Normally open contact, potential free
Suitable for: AC1
Rated current: 6 A
Output voltage: 230 V~
Control/Signal outputs: 1, electronic output, 0-10 V
Rated current: 30 mA
Protection class (Device): IP 20
Temperature range (Device): -5 °C to 45 °C
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
LR/M 1.6.1 2CDG110011R0011
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
Light sensor
The light sensor is used in conjunction with the LR/M
1.6.1 light controller for constant light regulation.
Connection is via terminal (included).
Protection class (Device): IP 20
Temperature range (Device): -5 °C to 45 °C
Dimensions: (L x W x D): 20 mm x 54 mm
LF/U 1.1 GHQ6310039R0111
Binary input module 1 )
4-gang, 115/230 V
Module for insertion into the basic room controller unit.
It has 4 inputs for connecting 115/230 V contacts (AC or
DC).
The voltage is provided by the module.
Inputs: 4
Protection class (Device): IP 20
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
BE/M 4.230.1 2CDG110005R0011
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
Binary input module 1 )
4-gang, 12/24 V
Module for insertion into the basic room controller unit.
It has 4 inputs for connecting 12/24 V contacts (AC or DC).
The voltage must be provided externally.
Inputs: 4
Protection class (Device): IP 20
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
BE/M 4.24.1 2CDG110006R0011
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
Binary input module 1 )
4-gang
Module for insertion into the basic room controller unit.
It has 4 outputs for connecting fl oating contacts.
The scanning voltage is provided by the device.
Polling voltage: 12 V, potential-separated
Protection class (Device): IP 20
Dimensions: (L x W x D): 49 mm x 42 mm x 93 mm
BE/M 4.12.1 2CDG110007R0011
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
431