alpha bs

436
ABB i-bus ® KNX
Product Article-No. Order-No. Pack/Qty
DCF time transmitter 1 ) 2 ) 3 )
2-channel
For transmitting time and date to the KNX bus.
For synchronising other bus devices.
With automatic changeover between summer/winter
time.
Can be operated with or without DCF aerial.
Power pack for DCF reception is integrated.
Radio-controlled in conjunction with supplementary aerial
FA/A 2.1.
Power reserve: approx. 10 years
The bus connection is effected via the enclosed bus
terminal.
Connections:
KNX-line: Bus terminal
Protection class (Device): IP 20
Temperature range (Device): -10 °C to 50 °C
Dimensions: (L x W x D): 86 mm x 35 mm x 65.5 mm
module width: 2 MW
6145/10 6140-0-0027 1
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
2) 1 MW 18 mm.
3) Documentation only available in German.
Light sensor 1 ) 2 )
3-channel
Controls the lighting dependent on daylight using ABB
i-bus ®
KN X.
Applications can be set as twilight switches (1 to 100
lx) or light value switches (100 to 20 000 lx) during the
parameterisation of the device.
The light sensor is included in delivery.
Connections:
KNX-line: Bus terminal
Inputs: 1
Brightness limit value: 1 Lux - 20000 Lux
Protection class (Device): IP 20
Protection class (Sensor): IP 54
Temperature range (Device): -5 °C to 45 °C
Temperature range (Sensor): -40 °C to 70 °C
Dimensions: (L x W x D): 45 mm x 36 mm x 65.5 mm
module width: 2 MW
HS/S 3.1 GHQ6050063R0001
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
2) 1 MW 18 mm.
Brightness, temperature switch 1 ) 2 )
3gang
For detecting and controlling the brightness and temperature.
Threshold switch for controlling switching, dimming and
blind actuators depending on the ambient brightness and/
or temperature.
Ability to disable one or more threshold switches.
The bus connection is made via a bus terminal.
Connections:
KNX-line: Bus terminal
Inputs: 2
Brightness limit value: 1 Lux - 100000 Lux
Protection class (Device): IP 54
Temperature range (Device): -25 °C to 55 °C
Dimensions: (L x W x D): 110 mm x 72 mm x 54 mm
6146/10 6146-0-0022 1
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
2) Documentation only available in German.
Technical information
www.BUSCH-JAEGER-catalogue.com
Product Article-No. Order-No. Pack/Qty
Weather station 1 ) 2 )
4gang
The WS/S 4.1 weather station enables the recording and
processing of four independent, analogue input signals
according to DIN IEC 60381 (0-1 V, 0-5 V, 0-10 V, 1-10 V,
0-20 mA, 4-20 mA, 0-1000 Ohm, PT 100 in 2-conductor
technology and fl oating contact).
A power pack with 24 V DC voltage has been integrated to
supply the sensors.
The device can alternatively be operated with an operating
voltage of 115 to 230 V AC, 50/60 Hz.
A maximum of 300 mA is available across the entire voltage
range.
The application software is suited for the recording of
weather data.
Connections:
KNX-line: Bus terminal
Rated voltage: 24 V~, +15 % / -15 %
Secondary: 24 V
Inputs: 4
Polling voltage: , Input resistance approx. 18 kOhm
Outputs: 2
Rated current: 100 mA
Output voltage: 24 V
Protection class (Device): IP 20
Temperature range (Device): -5 °C to 45 °C
Dimensions: (L x W x D): 90 mm x 72 mm x 58 mm
Installation depth: 68 mm
module width: 4 MW
WS/S 4.1 2CDG110032R0011
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
2) 1 MW 18 mm.
Weather unit 1 ) 2 )
The WZ/S 1.1 detects and processes weather date it
receives from the weather sensor. The weather sensor
supplies data on twilight, brightness in three directions,
rain, temperature, information on day/night, wind speeds,
and time and date.
The WZ/S 1.1 weather station is adapted to the WES/A
weather sensor.
The weather sensor is directly supplied with power via the
integrated power pack.
The device can alternatively be operated with an operating
voltage of 115 to 230 V AC, 50/60 Hz.
Connections:
KNX-line: Bus terminal
Rated voltage: 230 V~, +10 % / -15 %
Rated frequency: 50 Hz/60 Hz
Inputs: 1
Protection class (Device): IP 20
Temperature range (Device): -5 °C to 45 °C
Dimensions: (L x W x D): 90 mm x 72 mm x 58 mm
Installation depth: 68 mm
module width: 4 MW
WZ/S 1.1 2CDG110034R0011
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
2) 1 MW 18 mm.
Weather sensor
The WES/A 1.1 records data on twilight, brightness in
three directions, rain (upper sensor surface permanently
heated, lower sensor surface for temperatures < 10° or
precipitation), temperature, information on day/night, wind
speeds, and time and date (DCF radio receiver).
An additional heating transformer is not required.
The WES/A 1.1 weather unit is adapted to the WZ/S
weather sensor.
Protection class (Device): IP 65
Temperature range (Device): -30 °C to 70 °C
Dimensions: (L x W x D): 80 mm x 67 mm x 125 mm
WES/A 1.1 2CDG120003R0011