alpha bs

ABB i-bus ® KNX
Product Article-No. Order-No. Pack/Qty
Timer 1 ) 2 )
2-channel
The timer with the week program controls electrical load
groups in a time-controls manner via ABB i-bus ® KNX.
Every channel can switch a load group on or off or transmit
a brightness value to a dimmer actuator.
24 memory locations with free block structure of the
weekdays.
Control element: Keyboard
Display elements: LCD display
Connections:
KNX-line: Bus terminal
Outputs: 2
Protection class (Device): IP 20
Temperature range (Device): -5 °C to 45 °C
Dimensions: (L x W x D): 86 mm x 36 mm x 65.5 mm
module width: 2 MW
SW/S 2.5 GHQ6050062R0001
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
2) 1 MW 18 mm.
Timer 1 ) 2 )
4-channel
The timer with the day, week, and year program controls
electrical load groups using ABB i-bus ® KNX independent
of time.
The time and date are sent to other bus devices on ABB
i-bus ® KNX for synchronisation.
Every channel can switch a load group on or off or transmit
a brightness value to a dimmer actuator.
The switch times can be programmed on the clock or on
the computer in conjunction with the PK/E 1.1 memory
card and the PS/E 1.1 programming set.
Power reserve: approx. 1.5 years
Battery type: lithium CR2450, 3 V
The bus connection is effected via the enclosed bus
terminal.
Control element: 15 set keys
Display elements: 1 LCD
Connections:
KNX-line: Bus terminal
Outputs: 4
Protection class (Device): IP 20
Temperature range (Device): -5 °C to 45 °C
Dimensions: (L x W x D): 86 mm x 108 mm x 64 mm
Installation depth: 68 mm
module width: 6 MW
SW/S 4.5 GHQ6050061R0001
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
2) 1 MW 18 mm.
Technical information
www.BUSCH-JAEGER-catalogue.com
Product Article-No. Order-No. Pack/Qty
Radio Time Switch, MDRC (prepared for DCF) 1 ) 2 )
4-channel
For time-dependent switching and dimming of KNX actuators
and for time/date transmission.
Radio-controlled in conjunction with supplementary aerial
FA/A 2.1.
Power pack for DCF reception is integrated.
Programming on the timer or with PC (programming set).
Data transfer and data protection possible using optional
memory card.
Memory locations: 324 (free block-formation)
Power reserve: approx. 1.5 years
Battery type: lithium CR2450, 3 V
The bus connection is effected via the enclosed bus
terminal.
Control element: Keyboard
Display elements: LCD display
Connections:
KNX-line: Bus terminal
Outputs: 4
Protection class (Device): IP 20
Temperature range (Device): -5 °C to 45 °C
Dimensions: (L x W x D): 86 mm x 108 mm x 64 mm
Installation depth: 68 mm
module width: 6 MW
FW/S 4.5 GHQ6050060R0001
1) As required, you can fi nd the programmable functions in the current application description, which
you can download in the Support Centre on our Internet page.
2) 1 MW 18 mm.
Antenna for wireless timer
Antenna for connection to the radio timer FW/S 4.5.
The time signal of the DCF 77 transmitter can be received
within a 1000km radius of Frankfurt am Main, Germany.
Display elements: Operating LED
Rated voltage: 12 V
Protection class (Device): IP 54
Temperature range (Device): -20 °C to 70 °C
Dimensions: (L x W x D): 64 mm x 98 mm x 34 mm
Installation depth: 79 mm
FA/A 2.1 GHQ6050031R0021
Programming set
The programming set contains a CD-ROM with the
Obelisk software for the creation of switching programs
for the SW/S 4.5 and FW/S 4.5 timers, a PK/E 1.1 memory
card for the transfer of the switching programs and data
backup, a programming adapter for the memory card for
connection to a computer (RS232), and a manual.
PS/E 1.1 GHQ6001942R0001
Memory card
For the transfer of the switch programs and data backup
for the SW/S 4.5 and FW/S 4.5 timers.
PK/E 1.1 GHQ6001943R0001
435