Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.Disassembly<br />
Disassembly<br />
Figure 8<br />
Processor<br />
Installation<br />
a. Insert the CPU.<br />
b. Turn the release latch towards<br />
the lock symbol.<br />
c. Remove the sticker from<br />
the heat sink and insert<br />
the heat sink.<br />
d. Tighten the screws.<br />
�<br />
A. CPU<br />
D. Heat Sink<br />
• 8 Screws<br />
Processor Installation Procedure<br />
1. Insert the CPU A , pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!), and turn<br />
the release latch B towards the lock symbol (Figure 8b).<br />
2. Remove the sticker C (Figure 8c) from the heat sink.<br />
3. Insert the heat sink D as indicated in Figure 8c.<br />
4. Tighten the CPU heat sink screws in the order 1<br />
ure 8d).<br />
to 4 and 5 to 8 (the order as indicated on the label and Fig-<br />
5. Replace the component bay cover and tighten the screws (see page 2 - 6).<br />
b. d.<br />
2 - 12 Removing and Installing a Processor<br />
a.<br />
A<br />
B<br />
c.<br />
3<br />
C<br />
D<br />
1<br />
2 4<br />
C<br />
7<br />
6<br />
5<br />
8<br />
Note:<br />
Tighten the screws in<br />
the order as indicated<br />
on the label.
Change language