DATA SHEET - IEETA

Philips Semiconductors Product specification
8-bit microcontroller with on-chip CAN P8xC592
19 ABSOLUTE MAXIMUM RATINGS (note 1)
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL PARAMETER MIN. MAX. UNIT
VDD voltage on VDD pin −0.5 +6.5 V
VI1
input voltage on any pin
(except CTX0, CTX1, CRX0, CRX1 and EA/VPP)
−0.5 VDD + 0.5 V
VI2 input voltage on EA/VPP to VSS −0.5 +13 V
II, IO
input/output current on any single I/O pin
(except from CTX0 and CTX1)
− ±10 mA
IOT sink current of CTX0, CTX1 together − 30 mA
source current of CTX0, CTX1 together − −20 mA
Ptot total power dissipation (note 2) − 1.0 W
Tstg storage temperature range −65 +150 °C
Tamb
operating ambient temperature range:
P8xC592 FFA −40 +85 °C
P8xC592 FHA −40 +125 °C
Notes
1. The following applies to the Absolute Maximum Ratings:
a) Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at these or any conditions other than those
described in the Chapters 20 “DC characteristics” and 21 “AC characteristics” of this specification is not implied.
b) This product includes circuitry specifically designed for the protection of its internal devices from the damaging
effect of excessive static charge. However, it is suggested that conventional precautions be taken to avoid
applying greater than the rated maxima.
c) Parameters are valid over operating temperature range unless otherwise specified.
All voltages are with respect to VSS unless otherwise noted.
2. This value is based on the maximum allowable die temperature and the thermal resistance of the package, not on
device power consumption.
1996 Jun 27 79