AmstradCPC6128-hypertext-en-Sinewalker

A third menu will then be displayed:
Write to A: 9
Write to B: 6
Exit menu 3
This menu offers a choice of drive into which you wish to place the disc for copying
onto. You may, if you wish, select the same drive as that for copying from, but it will
mean that you will have to repeatedly change discs, and you won't be taking
advantage of your 2-drive system.
For greater ease and·speed of copying, press key f6 to copy onto the discin Drive B.
Now place the 2 discs into the appropriate drives, and type Y to commence copying.
Once again, information about the format of both discs will be displayed on the
screen, and if the disc to copy onto is not correctly formatted, (or not formatted at all),
this will be taken care of during copying.
After copying, the following message will be displayed:
Copy completed
Remove both discs
Press any key to continue
.... and you must remove BOTH discs before you can perform any further operations.
You may then repeat the copying process by typing Y, or exit to the main DISC KIT
menu by pressing any other key.
Verifying discs
The D I S C KIT 3 program also provides you with the facility to verify (check) a disc.
Information about the format of the disc is displayed, and all files on the disc are read.
Any errors present in the files are reported on the screen.
To verify a disc, insert Side 1 of your system discs package, and type:
Icpm
Foundation Course Chapter 1 Page 81