Positioning Systems - Romicon

2.5 System Configuration
Distance measuring
system
Endcap
Rails
Buffer
Forcer
Block
General Specifications for Linear Motor Axis
Name Motor type v max
Glider
Permanent magnets
(stator) Limit switch plug
[m/s]
a max
[m/s 2 ]
Holder for cable chain
Total length
L max
[mm]
Repeatability
Limit switch 1
(inductive; PNP)
Block
Cam switch
Motor plug
Framework
Distance measuring system plug*
Buffer
Limit switch 2 (inductive; PNP)
Reference switch (inductive; PNP)
* Values apply to the optical incremental distance measuring system with 40 µm periods of the sin/cos signal.
** Values apply to the HIWIN-MAGIC optical incremental distance measuring system with a sinus/cosinus signal (see page 117 onwards).
*** If bellow covers are used, the maximum acceleration could be restricted.
The distance measuring system is optical or magnetic, depending on the linear axis type or the customer’s requirement. As standard, sin/cos 1 V pp
is processed as an output signal; a TTL signal is also possible (see page 118 ff).
The maximum operating voltage depends on the linear motor type in use. For motor types LMS and LMT (iron-core motors), the maximum permissible
operating voltage is AC 530 V. For the LMC motor series (coreless motors), the maximum operating voltage is AC 240 V.
[mm]
* Connectors and cables supplied by the customer must be configured in line with HIWIN
specifications provided in the instruction manual
Accuracy
[mm/300 mm]
Straightness
[mm/300 mm]
Levelness
[mm/300 mm]
LMX1E- ... LMC 5 100*** 4000 +/- 0,001* +/- 0,005* +/- 0,01 +/- 0,01 17
LMX1L-S ... LMS 4 50*** 4000 +/- 0,001* +/- 0,005* +/- 0,01 +/- 0,01 24
LMX1L-T ... LMT 4 50 4000 +/- 0,001* +/- 0,005* +/- 0,01 +/- 0,01 38
LMV1L- ... LMS 1,8 30 600 +/- 0,001* +/- 0,005* +/- 0,01 +/- 0,01 40
LMH1L- ... LMS 4 50 30000 +/- 0,02** +/- 0,05** +/- 0,03 +/- 0,03 42
Page