Positioning Systems - Romicon

Positioning Systems
Linear Motor Axis
2.6 Model Numbers for Linear Motor Axis
2.6.1 Model Numbers for Single Linear Motor Axis
Linear motor axis
Axis type
X: Horizontal axis
V: Vertical axis
LM X 1 L S23 1 0872 A 1 0 0 XXX
Number of axis
1: single axis
Rails
L: Standard for iron-core motors
E: Standard for coreless motors
F: Flat design for coreless motors,
max. length 1 m
C: Customized
Motor type
Sxx: iron-core linear motors (see page 62)
Cxx: coreless linear motors (see page 66)
T37x: iron-core linear motor in sandwich
design (see page 68)
Number of forcers
Stroke [mm]
Cover
0: none (standard)
A: Metal cover
B: Bellow cover
Limit switch
0: none
1: inductive, PNP (standard)
2: optical, NPN
Power feed
0: none (standard)
1: for horizontal alignment, size 15x30
2: for vertical alignment, size 15x30
C: Customized
Distance measuring system
A: optical, period 40 µm, analog 1Vpp sin/cos
B: optical, period 20 µm, analog 1Vpp sin/cos
C: HIWIN-MAGIC (see Page 118ff): magnetic, period 1 mm, 1 Vpp sin/cos
D: HIWIN-MAGIC-IG (see page 118ff): magnetic, period 1 mm, 1 Vpp sin/cos
Magnetic way integrated in the guide rails (standard)
E: optical, absolute, encapsulated, with ENDAT interface
F: optical, incremental, 4 µm periods, glass scale
G: optical, digital TTL, resolution 1 µm
All encoders with individual reference signal at the start of the axis
Job number of drawing
Several forcers, Hall sensor, mass compensation,
brake, special fixing holes