Positioning Systems - Romicon

2.6.2 Model Numbers for Cross Tables
Linear motor axis
Axis type
X: Horizontal axis
LM X 2 L S23 S27 232 280 A 1 XXX
Number of axis
2: two axis
Rails
L: Standard for iron-core motors
E: Standard for coreless motors
F: Flat design for coreless motors,
max. length 1 m
C: Customized
Motor type of upper axis
Sxx: iron-core linear motors (see page 62)
Cxx: coreless linear motors (see page 66)
Stroke of upper axis [mm]
Motor type of lower axis
Sxx: iron-core linear motors (see page 62)
Cxx: coreless linear motors (see page 66)
Limit switch
0: none
1: inductive, PNP (standard)
2: optical, NPN
Distance measuring system
A: optical, period 40 µm, analog 1Vpp sin/cos
B: optical, period 20 µm, analog 1Vpp sin/cos
C: HIWIN-MAGIC (see Page 118ff): magnetic, period 1 mm, 1 Vpp sin/cos
D: HIWIN-MAGIC-IG (see page 118ff): magnetic, period 1 mm, 1 Vpp sin/cos
Magnetic way integrated in the guide rails (standard)
E: optical, absolute, encapsulated, with ENDAT interface
F: optical, incremental, 4 µm periods, glass scale
G: optical, digital TTL, resolution 1 µm
All encoders with individual reference signal at the start of the axis
Stroke of lower axis [mm]
Job number of drawing
Several forcers, Hall sensor, mass compensation,
brake, special fixing holes