CS1000 Software Input Output Reference - BT Business

Command Description
NEW ZONE
[
]
OUT NUMZONE
OUT RANGE_OF_ZONES
OUT ZDID
OUT ZFDP
PRT AQOS
/ ALL>
Create a new zone with parameters.
Caution:
Beginning in Release 7.0, Adaptive Network Bandwidth
Management provides bandwidth zone numbers in the
range 0–8000. If you are interoperating with an earlier
release you must use bandwidth zone numbers in the
range 0–255; call processing issues occur if you use
bandwidth zone numbers greater than 255.
Remove a ZBD numbering zone. Package 420 (Zone
Based Dialing) must be equipped.
Remove a range of existing bandwidth zones. This
command deletes a range of existing bandwidth zones,
starting from . If there are no
bandwidth zones with a zone number greater than
, then no bandwidth zones are
deleted.
Delete a ZBD numbering zone-based call translation.
Package 420 (Zone Based Dialing) must be equipped.
Delete a ZBD numbering zone-based flexible dialing
plan.Package 420 (Zone Based Dialing) must be
equipped.
Prints QoS records for specified attribute and zone (or for
all zones with ALL).
PRT CAB [cab] Print parameters and survivable capability of the specified
Expansion Cabinet.
PRT DNIP
[]
Print a list of IP addresses for each IP Phone registered with
the specified DN.
Note:
A partial DN can be entered.
PRT ES1 Print Echo Server 1’s IP address and port number.
PRT ES2 Print the Echo Server 2 IP address and port number.
PRT ESS Print both Echo Servers IP address and port number.
PRT INTERZONE Print interzone statistics for the range between the near and
far zones.
PRT INTRAZONE Print intrazone statistics for all zones or for the specified
zone.
PRT IPDN Print a list of DNs configured for the specified IP
address(es).
IP command descriptions
Nortel Communication Server 1000 April 2011 1089