CS1000 Software Input Output Reference - BT Business

Prompt Response Comment Pack/Rel
VXCT basic-5.00
0, 2, 4, ... 252
Virtual XCT loop number. ‘X’ to remove
existing VXCT
XCT xct-15
0, 2, 4,...158
Extended Conference/TDS/MFS
Loop number for NT8D17 Conference/TDS/
MFS card. Enter an even network loop
number for TDS/MFS functions. The
Conference function is automatically
assigned the next higher or odd loop
number.
System prints: TDS n MFS n CNF n+1
This indicates that TDS and MFS functions
are configured on the even loop "n" and
conference function is configured on the
next higher odd loop.
Precede with X to remove. Both loops must
be disabled first. Since TN 0 0 0 0 cannot be
used in non-multigroup systems, it is
recommended that Conference/TDS/MFS
card be placed in loop 0.
You may configure more than 16 conference
loops; however, enabling more than 16
conference loops may cause the system to
lock-up.
D0-D158 Dealer conference loop ohol-20
S0-S158 Spare dealer conference loop
Place in the same group as the units planned
to use this loop.
0-254 XCT loop number for NT8D17 Conference/
TDS Card, Systems with Fibre Network
Fabric
XNUM (1)-4 Number of retransmissions per message for
PMSI.
If XTMR = 0, this prompt does not appear.
XSM (NO) YES Extended System Monitor
This is the SDI port for the Extended System
Monitor. Prompt USER must be set to MTC
(maintenance messages) for the system
Alphabetical list of prompts
ohol-20
fnf-25
pms-19
xpe-15
Nortel Communication Server 1000 April 2011 575