CS1000 Software Input Output Reference - BT Business

LD 17: Configuration Record 1
Prompt Response Comment Pack/Rel
DES is used to identify the link and can be
up to 16 alphanumeric characters: 0-9, and
upper case (A-Z) including spaces
separating inputs. Characters * and # are not
allowed.
Spaces are removed by the system. For
example: CAB 5 PORT 2 becomes
CAB5PORT2. Use the underscore character
(_) instead, for example: CAB_5_PORT_2.
DES can be left blank or changed as
required. If DES is already defined for a link,
the system outputs the current name and reprompts
DES.
Precede the existing DES with X to remove.
Example: XCAB_5_PORT_2.
DIDD (0)-15 DID Delete
Number of leading digits to delete when
receiving digits from DID trunk.
DLAC (NO) YES Change Call Log Option, where:
YES - Log all calls
NO - Log unanswered calls
DLOP lll dd ff Digital Trunk Interface Loop or Loops.
Where:
lll = 0-159
lll = 1-9 11-19 21-29 31-39 41-49 Small
System
isdn-16
basic-7.00
dti-5
lse-25
lll = 0-255 systems with Fibre Network Fabric fnf-25
lll = 11-14, 21-24, 31-34, 41-44 for CS 1000S basic-1
lll is 0-255 for CS 1000E system and no dd
or ff
dd = maximum number of simultaneous
voice or data calls 0-(24)
ff = frame format D2, D3, D4, or ESF
The default for frame format ff is ESF if
prompt MODE is set to PRI; D3 if MODE is
set to DTI or LINK. Loop must be removed
before a change to ff can be made.
X to delete the loop.
L1 L2 Ln Digital Trunk Interface Loop or Loops
Loop numbers of the DTI Loops associated
with this VAS. Loops must have previously
518 Nortel Communication Server 1000 April 2011