CS1000 Software Input Output Reference - BT Business

Prompt Response Comment Pack/Rel
RAN2 x...x Secondary RAN route, where: mpo-20
• x...x = 0-127 for Small system, CS 1000S,
MG 1000B and MG 1000T
• x...x = 0-511 for Large system and CS 1000E
Use RAN2 as the Secondary route for
Language 0 in a Multi Language AWU
application. The route must be unique. TYPE
must = AWR in LD 16.
RANF x...x Music route, where: awu-10
• x...x = 0-127 for Small system, CS 1000S,
MG 1000B and MG 1000T
• x...x = 0-511 for Large system and CS 1000E
TYPE must = AWR in LD 16.
RANR x...x RAN Route number, where: ran-1
• x...x = 0-127 for Small system, CS 1000S,
MG 1000B and MG 1000T
• x...x = 0-511 for Large system and CS 1000E
RCLE (ATN OVF ATN ATN) isdn-15
Redirection Count Limit Exceeded as defined
by TRCL
TN is not allowed for attendant calls. NAP is
not allowed for any field for RCLE.
RCNT 0-(1)-5 Redirection Count for ISDN calls esn-14
Maximum number of inter-node hops allowed
in a network redirection call, only enforced
when ISDN = YES. This field must be set to
greater than 0 for a network redirection to take
place.
RCY1 1-(6)-15 Number of Cycles of Re-ringing before
forwarding to attendant or disconnecting.
Applies only if RGNA = DAR or AAR.
RCY2 1-(4)-15 Number of Cycles of Ringing before
forwarding to transferring station
Valid only for the RGNA option.
Alphabetical list of prompts
mpo-20
mpo-20
Nortel Communication Server 1000 April 2011 367