CS1000 Software Input Output Reference - BT Business

LD 15: Customer Data Block
Prompt Response Comment Pack/Rel
CFNA has three ringing cycle options. This
assigns the Distinctive Ringing cycles for
Option 0. Refer to Features and Services
Fundamentals, NN43001-106 for details
concerning this feature
DFN1 1-(4)-15 Number of Distinctive Ringing cycles for
CFNA, Option 1
DFN2 1-(4)-15 Number of Distinctive Ringing cycles for
CFNA, Option 2
uscr-19
uscr-19
DFNR (0)-15 DID Forward No Answer Ring cycles ffc-16
Defines the Number of ringing cycles before a
DID call is Slow Answer Recalled to the
attendant console after the last stage of CFNA
or hunt treatment has been completed (the
maximum number of CFNA or hunt steps is
two).
If DFNR = 0, then DID CFNA enhancement is
disabled. DID Call Forward No Answer is the
Master Timer. Prompted if the FNAD prompt is
not ATT or NO.
DGRP (0)-2046 Maximum number of Dial Intercom Groups
(DIG)
Prompted with Dial Intercom (DI) package 21
DIALPLAN aaa Configure the on-net dial plan (public or
private) when ZBD feature is enabled (controls
DN/CLID processing).
Where:
• aaa = PUB (public on-net dial plan)
E.164 CLID is displayed on a terminating
telephone
• aaa = PRV (private on-net dial plan)
7-digit DN/CLID is displayed on a
terminating telephone
DIDN (YES) Precede the DN of the active DN key with the
digits in HLCL
NO Use digits in HLCL
SRCH Find a DN key of the set from key 0 which has
DIDN of a CLID entry set to YES
di-1
zbd-6.00
isdn-22
322 Nortel Communication Server 1000 April 2011