CS1000 Software Input Output Reference - BT Business

LD 117: Ethernet and Alarm Management
STAT LINK NAME
Command Description
Note:
The IP address can be in full or partial IP address format
(e.g., "10.11.12.13" or "10.11").
Display the link information status of the servers based on
the supplied host name.Where =
MAINSERVER
STAT LINK NODE Display the link information status of the specified
node.Where = a number from 0 - 9999.
STAT LINK SRV
STAT SERV APP
Note:
The nodeID identifies the node number assigned to a
group of Voice Gateway Media Cards and Signaling
Server equipment.
Display the link information status of the servers for the
specified server type.Where is:
• ITGP (ITG Pentium)
• SMC (Media Card)
• SS (Signaling Server)
Display the link information status of the server for the
specified application.Where is:
• LTPS (Line TPS)
• VGW (Voice Gateway)
• H323 (H.323 Virtual Trunk)
• GK (GateKeeper)
• SIP (Session Initiated Protocol)
• MC32S = 32 port Mindspeed VGMC
• SLG (SIP Line Gateway)
STAT SERV IP Display the link information status of the server for the
specified IP address, or IP addresses contained in the
specified sub-net.Where = the ELAN IP
address of the Signaling Server or Voice Gateway Media
Card.
STAT SERV NAME
Note:
The IP address can be in full or partial IP address format
(e.g., "10.11.12.13" or "10.11").
Display the link information status of the servers based on
the supplied host name.Where =
MAINSERVER
1092 Nortel Communication Server 1000 April 2011