CS1000 Software Input Output Reference - BT Business

LD 117: Ethernet and Alarm Management
Command Description Pack/Rel
Create new bandwidth zones.
This command creates a range of new bandwidth zones starting
from . The number of existing
bandwidth zones must be less than 8001. If the number of
existing bandwidth zones is greater than or equal to 8001, no
bandwidth zones are created.
Where:
• zoneStartNumber = Zone number [0–8000]
Caution:
Beginning in Release 7.0, Adaptive Network Bandwidth
Management provides bandwidth zone numbers in the
range 0–8000. If you are interoperating with an earlier
release you must use bandwidth zone numbers in the
range 0–255; call processing issues occur if you use
bandwidth zone numbers greater than 255.
• zoneAmount = Number of zones that must be created [1-8001]
• intraZoneBandwidth = Intrazone available bandwidth (0 to
10000000 Kbps)
• intraZoneStrategy = Intrazone preferred strategy (Best
Quality (BQ) or Best Bandwidth (BB))
• interZoneBandwidth = Interzone available bandwidth (0 to
10000000 Kbps)
• interZoneStrategy = Interzone preferred strategy (BQ or BB)
• zoneIntent = MO (default), BMG, or VTRK
• zoneResourceType = shared or private
NEW ROUTE
Configure a new routing entry
= valid IP address
Note:
This command is blocked for co-resident Call Server
applications (Call Server and Signaling Server applications
co-located on a CP PM server). Network configuration and
management are controlled from the Linux Base layer.
NEW SUBNET
""
Add a subnet entry where:
basic-7.0
0
basic-5.0
0
1150 Nortel Communication Server 1000 April 2011