CS1000 Software Input Output Reference - BT Business

Prompt Response Comment Pack/Rel
DEL (0)-19 Number of leading digits to be Deleted b/nars-1
(0)-32 Number of leading digits to be deleted (1-32) in case
of CMDB
DLTN (YES) NO NARS/BARS Dial Tone after dialing AC1 or AC2
access codes
basic-7.00
b/nars-1
DMI Digit Manipulation Index numbers b/nars-20
(0) No digit manipulation required
(0)-31 CDP
(0)-255 NARS/BARS
(0)-999
(0))-1999
NARS/BARS with Flexible Numbering Plan (FNP)
package 160
The maximum number of Digit Manipulation tables
is defined by prompt MXDM. DMI is not prompted if
route TKTP = ADM.
DORG (NO) YES The CLID information of the original caller is sent in
the setup message. If it is set to No, there is no
change in function of the feature and the CLID
information of the transferring telephone is sent.
zbd-7.00
basic-5.00
ENTR 0-63 Entry number for NARS/BARS Route List esn-1
0-6 Route list entry number for CDP
X Precede with x to remove
ERDT 0-(6)-10 Expensive Route Delay Time (in 2 second intervals) b/nars-1
ERWT (YES) NO Expensive Route Warning Tone
Note:
ERWT is not supported on TIE trunks.
ERWT defaults to of three bursts of tone, but can be
modified in LD 56 if Flexible Tones and Cadences
(FTC) package 125 is equipped, to indicate that the
call is placed over an expensive route.
The user has 3 choices:
1. go On-Hook and abort the call
2. remain On-Hook and accept the call
3. activate Ring Again
Alphabetical list of prompts
b/nars-1
Nortel Communication Server 1000 April 2011 945