CS1000 Software Input Output Reference - BT Business

Prompt Response Comment
AUTO The system provides the new DNs or position IDs (for ACD
telephones) and TNs by automatically selecting consecutive
unused DNs or ACD position IDs and TNs.
- TN l s c u c u TN of new set (as defined on Terminal Number. The TN defines
the location of the telephone.)
- DN x...x yyyy Directory Number and CLID table entry (Range is (0)-value
entered for SIZE prompt in LD 15 minus one)
- POS xxxx ACD position ID of new set
TNDN Manual selection of DNs or ACD position IDs and TNs. You are
prompted for the DN or ACD position ID and TN of each new
telephone.
- TN l s c u c u TN of new set (as defined on Terminal Number. The TN defines
the location of the telephone.)
- DN x..x yyyy Directory Number and CLID table entry (Range is (0)-value
entered for SIZE prompt in LD 15 minus one)
- POS xxxx ACD Position ID of new set
TN The new DNs or ACD Position IDs are provided by the system.
You are prompted for the starting DN or ACD Position ID and
each TN. TN is prompted -n- times as defined in the CPY
command.
- TN l s c u c u TN of new set (as defined on Terminal Number. The TN defines
the location of the telephone.)
- DN x..x yyyy Directory Number and CLID table entry (Range is (0)-value
entered for SIZE prompt in LD 15 minus one)
- POS xxxx ACD Position ID of new set
DN The new TNs are provided by the system. You are prompted for
the starting TN and each DN or ACD Position ID.
- TN l s c u c u TN of new set (as defined on Terminal Number. The TN defines
the location of the telephone.)
- DN x..x yyyy Directory Number and CLID table entry (Range is (0)-value
entered for SIZE prompt in LD 15 minus one)
- POS xxxx ACD Position ID of new set
Prompts and responses by task
Nortel Communication Server 1000 April 2011 145