CS1000 Software Input Output Reference - BT Business

Prompt Response Comment Pack/Rel
This prompt appears when the Multi-Party
Operations (MPO) package is equipped,
MPOP = YES and FMOP = YES.
ACT_BUSY (FLSH) LCD Lamp flash rate is 30 impulses per
minute.
WINK LCD Lamp flash rate is 60 impulses per
minute.
LIT LCD Lamp is on.
DARK LCD Lamp is off.
ACT_IDLE (WINK) LCD Lamp flash rate is 60 impulses per
minute.
FLSH LCD Lamp flash rate is 30 impulses per
minute.
LIT LCD Lamp is on.
DARK LCD Lamp is off.
ADDG 0-(8)-99..99 Additional digits, 1 to 15 digits. They is used to
complete ANDN if LEC+ANDN is less than
ANSZ digits (defined in OVL 16).
ANDN 0-99..99 Used as ANI DN if Calling number not
available or DNLG=0. Up to 15 digits can be
entered.
X remove ANDN
bfs-24
bfs-24
ADHT (0)-14 Attendant Delay on Hold Timer supp-9
Prompted with International Supplementary
Features (SUPP) package 131.
ADLD (0)-120 Auto Dial Delay ffc-20
Time in two-second interval.
Prompted with the Flexible Feature Codes
(FFC) package 139. 0 = Auto Dial does not
take place.
AFBT (0)-2-AFNT Attendant Forward Buzz Tone afna-14
The number of seconds in 2 second intervals
that the attendant is buzzed at full volume.
Odd entries are rounded down to the next valid
Alphabetical list of prompts
Nortel Communication Server 1000 April 2011 303