Thermo Miran Sapphire XL Manual 2005 - IE Monitoring Instruments

Chapter 2 Specifications
Concentration Alarm Low, High, and STEL
Power Requirements of
ac/dc Converter
Measurement Cycle Time
Reference, Operating, and
Storage Conditions
Electromagnetic
Compatibility (EMC)
95 to 260 V ac at 50/60 Hz, ±3% or 11 to 15 V dc, 5 A
(from automobile battery with optional dc power cable)
Single gas analysis screen updated each half-second.
Dependent upon application in multigas mode or if
compensations are enabled.
See Table 2-2.
Complies with the requirements of the European EMC
Directive 89/336/EEC.
Sample Flow Rate
14 liters/minute (nominal) with sampling wand and
particulate filter.
Sample Cell Volume 2.23 liters
Gas Purging 5 volumes of sample required to purge cell by 99%.
Table Error! No text of specified style in document.-2. Operating and Storage
Conditions
Influence
Ambient
Temperature
Relative
Humidity
Ambient
Pressure (d)
Reference
Operating
Conditions (a)
23 ±2°C
(73 ±4°F)
50 ±10%
101.3 ±1% kPa
(14.7 ±1% psi)
Normal
Operating
Conditions (b)
5 to 40°C
(40 to 105°F)
5 to 95%
(noncondensing)
86 to 106 kPa
(12.5 to 15.3 psi)
2-2
Normal
Operative
Limits (c)
1 and 50°C
(35 and 120°F)
0 and 95%
(noncondensing)
80 and 110 kPa
(11.6 and 15.9
psi)
Transportation
and
Storage Limits
(c)
-20 and +60°C
(-5 and 140°F)
0 and 100%
(noncondensing)
80 and 110 kPa
(11.6 and 15.9
psi)
(a) Range of operating conditions within which the influence is negligible.
(b) Range of operating conditions within which a device is designed to operate and for which the
specifications for the influence applies.
(c) Range to which a device can be subjected without permanent impairment of operating
characteristics. Device may require adjustment to restore specified performance upon returning
within the limits of Normal Operating Conditions. Maximum temperature for intrinsically safe
models is 40°C
(d) Single pressure point within the range, pressure may not vary throughout the range.