Thermo Miran Sapphire XL Manual 2005 - IE Monitoring Instruments

ANALYZER OUTPUT CONNECTIONS
3-9
Chapter 3 Instrument Preparation
Warning: Intrinsically safe models require special actions with respect to the following
section. Refer to Appendix B for descriptions of these actions.
The power and signal connection panel is located behind a hinged door on the analyzer.
It contains a parallel port for output to a printer, a serial port for connections to a PC, and
an output connection to provide 0 to 1 V dc analog and relay contact output. See Figure
3-8 for the location of each.
Firmware
Update
Switch
Figure 3-8. Location of Output Connections)
Latch