course contents - ug - National Institute of Technology Karnataka

More documents

Recommendations

Info

NATIONAL INSTITUTE OF TECHNOLOGY KARNATAKA, SURATHAKAL ------------------------------------------------------------------------------------------------------------------ MANDATORY LEARNING COURSES (MLC) MLC1 ENVIRONMENTAL STUDIES (2-0-0) 2 Definition, scope and importance of Environmental Studies, Need for public awareness. Natural Resources Renewable and Non-renewable Resources. Natural resources and associated problems. Concept of an ecosystem: Structure and function of an ecosystem, Producers, consumers and decomposers, Energy flow in the ecosystem, Ecological succession, Food chains and ecological pyramids, Biodiversity and Its Conservation, Environmental Pollution: Definition, Causes, effects and control measures. Pollution case studies. Disaster management, Social Issues and the Environment, Environmental ethics, Climate change, global warming, acid rain, ozone layer depletion, nuclear accidents and holocaust. Wasteland reclamation, Consumerism and waste products, Acts related to Environment Protection, Isues involved in enforcement of environmental legislation, Human Population and the Environment, Field work equal to 5 lecture hours. R. Rajagopalan, Environmental Studies, Oxford IBH Pub. Benny Joseph, Environmental Studies, McGraw Hill Pub. Erach Bharucha, Text Book for Environmental Studies, Pub., UGC. Masters, Gilbert M. Introduction to Environmental Engineering and Sciences, Prentice Hall India. MLC2 PROFESSIONAL ETHICS AND HUMAN VALUES (1-0-0) 1 Professional ethics: Aim of Engineering, Responsibilities of Engineers, Rights of Engineers, Impediments to responsibilities, Honesty, Integrity, Reliability, Risk, Safety and Liability, Global issues. Personal ethics: Value of self, others and society, Compliance with law, Social norms, Service to community, Corruption, Indian and Western culture, Simple living and high thinking, Science and Spirituality. Charles E. Harris et al., Engineering Ethics. N. N. Das, Ethical Considerations. --------------------------------------------------------------------- NITK-Course Contents(UG)2010 Page 2 of 134
NATIONAL INSTITUTE OF TECHNOLOGY KARNATAKA, SURATHAKAL ------------------------------------------------------------------------------------------------------------------ Department of Applied Mechanics and Hydraulics AM100 ENGINEERING MECHANICS (3-1-0) 4 Fundamentals of force system, Concept of Rigid body and deformable bodies, Free body diagrams. Support Reactions-Determinate and Indeterminate structures. Analysis of Trusses, Frames and Machines. Centroid and Moment of Inertia of plane areas. Shear Force and Bending Moment Diagrams. Simple stress and strain, Hooke�s Law, Mechanical properties of materials, Elastic Constants, Compound Bars, and Temperature stresses. Merian, J.L, Kraige, L.G. Engineering Mechanics – Statics, 5th Edition, Wiley Publishers, New-Delhi, 2007. Beer & Johnston, Mechanics for Engineers, 4th Edition, McGraw – Hill, New Delhi, 1987. Timoshenko, S.P., Young, D.H., Rao, J.V. Engineering Machines,4th Edition, McGraw-Hill, Singapore, 1956. Singer, F.L. Strength of Materials, Third Edition, Harper and Row Publishers, New York, 1980. Hearn, E.J., Mechanics of Materials, Pergaman Press, England, 1972. Beer and Johnston E. R. Mechanics of Materials, 3rd Edition, Tata McGraw Hill, New Delhi, 2007. AM200 MECHANICS OF MATERIALS (3-1-0) 4 PREREQ: AM100 Simple flexure theory, Bending stress and shearing stress distribution across sections. Deflection of beams, Macaulay�s method for deflection of statically determinate beams. Compound stresses � analytical method, graphical method � Mohr�s circle of stresses., Torsion, Transmission of power through hollow and solid shafts. Beams of uniform strength, Springs, Combined bending and torsion, Strain energy, Theories of failure, Columns & struts, Thick and thin pressure vessels. Singer, F.L. Strength of Materials, 3rd Edition, Harper and Row Publishers, New York, 1980. Hearn, E.J., Mechanics of Materials, Pergaman Press, England, 1972. Beer and Johnston E. R. Mechanics of Materials, 3rd Edition, Tata McGraw Hill, New-Delhi, 2007. AM 201 MECHANICS OF SOLIDS (2-1-0) 3 PREREQ: AM100 Simple flexure theory, Bending stress and shearing stress distribution across sections Macaulay�s method for deflection of statically determinate beams. Compound stresses - Analytical Method, Graphical Method � Mohr�s Circle. Torsion, Transmission of Power through hollow and solid shafts. Beams of Uniform strength, Springs, combined bending and Torsion, Strain energy. Thick and Thin pressure vessels Singer, F.L. Strength of Materials, 3rd Edition, Harper and Row Publishers, New York, 1980. Hearn, E.J., Mechanics of Materials, Pergaman Press, England, 1972. Beer and Johnston E. R. Mechanics of Materials, 3rd Edition, Tata McGraw Hill, New-Delhi, 2007. AM 216 STRENGTH OF MATERIALS LAB (0-0-3) 2 Tension test on mild steel and cast iron, Compression test on mild steel and cast iron, Torsion test on mild steel rod, Rockwell and Brinell hardness tests, Impact test (Charpy and Izod) on mild steel, Bending test on mild steel rod and wood, Shear test on mild steel plate and rod, tests on leaf and helical spring. Demonstration on fatigue test. Hearn, E.J., Mechanics of Materials, Pergaman Press, England, 1972. Beer and Johnston E. R. Mechanics of Materials, 3rd Edition, Tata McGraw Hill, New-Delhi, 2007. AM217 MECHANICS OF SOLIDS LAB (0-0-2) 1 Tension tests on mild steel and cast iron, Compression tests on mild steel and cast iron, Shear tests, Bending test on mild steel, Torsion test, Hardness test and Impact test, (Tests on Springs). Demonstration on fatigue test. Hearn, E.J., Mechanics of Materials, Pergaman Press, England, 1972. Beer and Johnston E. R. Mechanics of Materials, 3rd Edition, Tata McGraw Hill, New-Delhi, 2007. --------------------------------------------------------------------- NITK-Course Contents(UG)2010 Page 3 of 134
Page 1: NATIONAL INSTITUTE OF TECHNOLOGY KA
Page 5 and 6: NATIONAL INSTITUTE OF TECHNOLOGY KA
Page 53 and 54:
NATIONAL INSTITUTE OF TECHNOLOGY KA
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
show all

course contents - ug - National Institute of Technology Karnataka

Create successful ePaper yourself

Delete template?

Save as template?