English (United Kingdom) - Paul Wurth

More documents

Recommendations

Info

Specification sheet Hempel (Germany) GmbH Project: Area: Type D specific Bellless Top components Surface preparation: Paul Wurth 519 E Oil and grease etc. to be removed by emulsion cleaning. Entire area to be (high pressure) fresh water cleaned in order to remove salts and other contaminants. When the surface is dry: Abrasive blasting to minimum Sa 2½ according to ISO 8501-1:1988. Product name (including quality number) Treated area % Shade Shade no. Film thickness Theoretical spreading Application methods (micron) rate Roller Wet Dry (sqm/ltr) Brush Spray Recommended HEMPADUR ZINC 87260 f/c Red-grey 19830 125 70 8.9 X X .015"-.026" 160 bar HEMPADUR 17550 f/c Red 57370 200 150 5.1 (X) (X) 0.0 bar HEMPADUR 17550 f/c Black 19990 200 150 5.1 (X) (X) 0.0 bar t/u: touch up f/c: full coat Total d.f.t. 370 X: Recommended (X): Possible Recoating intervals. Ample ventilation Hrs=Hour(s) Mth=Month(s) N/R=Not Recommended Quality no 87260 17550 D.F.T. (micron) 70 150 Remarks and Product information see next page. Recoated with quality no 17550 17550 Hempel's PreSale System 2.6.16 (Build 668) User name: Christian Sauer Quality Code: Printed at: 25.06.2009 12:57 Department name: Sales Protective Environment : Severe Created/Last modified: 24.06.2009 16:20 DECSA0004 Page: 3 Nozzle orifice 40°C 30°C 20°C 10°C 0°C -10°C Nozzle pressure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 2 Hrs None 4 Hrs None 6 Hrs None 14 Hrs None N/R N/R N/R N/R 5 Hrs 29 Hrs 8 Hrs 48 Hrs 12 Hrs 72 Hrs 27 Hrs 6½ Day N/R N/R N/R N/R HEMPEL
Specification sheet Hempel (Germany) GmbH Project: Area: Type D specific Bellless Top components Paul Wurth 519 E Product information: Mixing ratio Pot life Dry to touch Flash Application restrictions Shade no. Volume solids % Curing agent volume 20°C 20°C point °C Thinner Min. Temp. Max. RH% °C HEMPADUR ZINC 87260 19830 62 89200 5 : 1 8 h 23 08810 5 HEMPADUR 17550 57370 76 98110 4 : 1 6 h 25 08450 5 HEMPADUR 17550 19990 76 98110 4 : 1 6 h 25 08450 5 The data, specifications, directions and recommendations (hereinafter "Information") given in this painting specification are based upon test results obtained under controlled or specifically defined conditions and said Information is correct to the best of our knowledge. The User must satisfy itself that it is appropriate to use the Product in accordance with the Information in the actual conditions under which the Product is intended to be used, and the Manufacturer and Seller do not guarantee the accuracy, completeness or appropriateness of the Information when the Product is used in those conditions. The provisions of Clause 8 of the GENERAL CONDITIONS OF SALE, DELIVERY AND SERVICE shall apply to any and all claims arising out of or in connection with the use of the Product as recommended above, overleaf or otherwise. Hempel's PreSale System 2.6.16 (Build 668) User name: Christian Sauer Quality Code: HEMPEL Printed at: 25.06.2009 12:57 Department name: Sales Protective Environment : Severe Created/Last modified: 24.06.2009 16:20 DECSA0004 Page: 4
Page 1 and 2: Painting Paul Wurth Paint System Ty
Page 3 and 4: Carboline Benelux Braak 1 · 4704 R
Page 5 and 6: PAINT SYSTEM Type C, PAINT MANUFACT
Page 7 and 8: PAINT SYSTEM Type C, PAINT MANUFACT
Page 11 and 12: PAINT SYSTEM Type F, PAINT MANUFACT
Page 19 and 20: Selection & Specification Data Gene
Page 21 and 22: .Selection & Specification Data . G
Page 43: Specification sheet Hempel (Germany
Page 47 and 48: Specification sheet Hempel (Germany
Page 59 and 60: HEMPADUR FAST DRY 15560 SURFACE New
Page 61 and 62: Product Data Issued: March 2009 Pag
Page 67 and 68: Product Data Issued: November 2008
Page 69 and 70: HEMPADUR MASTIC 45880/45881 Applica
Page 71 and 72: HEMPEL'S GALVOSIL 15702 SURFACE Rem
Page 73: HEMPEL’S SILICONE ALUMINIUM 56910
Page 77 and 78: HEMPADUR 85671 Issued January 2011
Page 79 and 80: HEMPADUR 85671 Microclimate: The ac
Page 81 and 82: HEMPADUR 85671 Issued January 2011
Page 83 and 84: Application Instructions Applicatio
Page 85 and 86: HEMPEL'S VINYL ESTER GF 35910 Issue
Page 89 and 90: PAINT SYSTEM TYPE F * + TYPE J * PA
Page 91 and 92: E N G 0 3 0 5 Interseal 670HS S u r
Page 93 and 94: Interseal 670HS S u r f a c e T o l
Page 95 and 96:
PRODUCT DESCRIPTION INTENDED USES P
Page 97 and 98:
PRODUCT CHARACTERISTICS SYSTEMS COM
Page 99 and 100:
Intertherm® 50 H i g h T e m p e r
Page 101 and 102:
Intertherm ® 50 High Temperature S
Page 103 and 104:
Painting Paul Wurth Paint System Ty
Page 105 and 106:
Technical specification Customer: P
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Technical Data Barrier 80 Product d
Page 117 and 118:
Typical paint system Barrier 80 1 x
Page 119 and 120:
Other surfaces The coating may be u
Page 121 and 122:
Drying time Drying times are genera
Page 123 and 124:
Technical Data Penguard Express Pro
Page 125 and 126:
Substrate temperature 40°C Surface
Page 127 and 128:
Technical Data Epoxy HR Product des
Page 129 and 130:
Typical paint system Epoxy HR 2 x 1
Page 131 and 132:
Shopprimed steel Clean, dry and und
Page 133 and 134:
Penguard FC Page 4 of 4
Page 135 and 136:
Other surfaces The coating may be u
Page 137 and 138:
ISSUED 6 DECEMBER 2007 BY JOTUN THI
Page 139 and 140:
Condition during application The te
show all

English (United Kingdom) - Paul Wurth

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?