English (United Kingdom) - Paul Wurth

Specification sheet
Hempel (Germany) GmbH
Project:
Paul Wurth 519 E
Area:
Type F, Slag Granulation System, internal surfaces, Temp. max 90 °C
Surface preparation:
Oil and grease etc. to be removed by emulsion cleaning. Entire area to be (high pressure)
fresh water hosed in order to remove salts and other contaminants. When the surface is
dry: Abrasive blasting to minimum Sa 2½ according to ISO 8501-1:1988. Surface profile
corresponding to Rugotest No. 3, BN 10, Keane-Tator Comparator, 3.0 G/S, or ISO
Comparator Rough Medium (G).
Dust off residues.
Product name (including quality number)
Treated area
% Shade
Shade no.
Film thickness Theoretical spreading Application methods
(micron)
rate
Roller
Wet Dry (sqm/ltr) Brush
Spray
Recommended
HEMPADUR 85671 f/c Off white 11630 150 100 6.8 (X) X .018"-.021" 200 bar
HEMPADUR 85671 f/c Light red 50900 150 100 6.8 (X) X .018"-.021" 200 bar
HEMPADUR 85671 f/c Off white 11630 150 100 6.8 (X) X .018"-.021" 200 bar
t/u: touch up f/c: full coat Total d.f.t. 300 X: Recommended (X): Possible
Recoating intervals. Ample ventilation Hrs=Hour(s) Mth=Month(s) N/R=Not Recommended
Quality no
85671
85671
D.F.T.
(micron)
100
100
Remarks and Product information see next page.
Recoated with
quality no
85671
85671
Nozzle
orifice
40°C 30°C 20°C 10°C 0°C -10°C
Nozzle
pressure
Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max.
Hempel's PreSale System 2.6.16 (Build 668)
User name:
Christian Sauer
Quality Code:
Printed at: 25.06.2009 12:57 Department name: Sales Protective Environment : Immersion
Created/Last modified: 24.06.2009 16:20 DECSA0004 Page: 13
N/R N/R 36 Hrs 10½ Day 72 Hrs 21 Day 7½ Day 52½ Day N/R N/R N/R N/R
N/R N/R 36 Hrs 10½ Day 72 Hrs 21 Day 7½ Day 52½ Day N/R N/R N/R N/R
HEMPEL