English (United Kingdom) - Paul Wurth

Specification sheet
Hempel (Germany) GmbH
Project:
Area:
Type G, High Temperature to 449°C
Surface preparation:
Paul Wurth 519 E
Oil and grease etc. to be removed by emulsion cleaning. Salts and other contamination to
be removed by high pressure fresh water hosing. When the surface is dry: Damaged and
rusty shopprimer as well as welds to be abrasive blasted to Sa. 2½ according to ISO
8501-1:1988 with a surface profile corresponding to Rugotest No. 3 BN 10a. Intact
shopprimer to be thoroughly abrasive hard swept to a dense roughness of magnitude as
indicated above. Dust off residues.
Product name (including quality number)
Treated area
% Shade
Shade no.
Film thickness Theoretical spreading Application methods
(micron)
rate
Roller
Wet Dry (sqm/ltr) Brush
Spray
Recommended
HEMPEL'S GALVOSIL 15702 f/c Metal grey 19840 75 50 12.8 (X) X .019"-.023" 100 bar
HEMPEL'S SILICONE ALUMINIUM 56910 f/c Light alu 19000 75 25 14.0 (X) X .017" 125 bar
t/u: touch up f/c: full coat Total d.f.t. 75 X: Recommended (X): Possible
Recoating intervals. Ample ventilation Hrs=Hour(s) Mth=Month(s) N/R=Not Recommended
Quality no
15702
D.F.T.
(micron)
50
Remarks and Product information see next page.
Recoated with
quality no
56910
Hempel's PreSale System 2.6.16 (Build 668)
User name:
Christian Sauer
Quality Code:
Printed at: 25.06.2009 12:57 Department name: Sales Protective Environment : Medium
Created/Last modified: 24.06.2009 16:20 DECSA0004 Page: 7
Nozzle
orifice
40°C 30°C 20°C 10°C 0°C -10°C
Nozzle
pressure
Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max.
HEMPEL