English (United Kingdom) - Paul Wurth

PAINT SYSTEM TYPE C *
PAINT MANUFACTURER INTERNATIONAL PAINT
ENVIRONMENT
C4-High Corrosivity. (ISO 12944-2)
DURABILITY
Medium durability 5-15 years
Cleaning before surface preparation
PAINT SYSTEM FOR NEW WORKS (in fabrication shop)
All surfaces should be clean,dry and free of contamination.Pre-treat in accordance with ISO 8504:2000
Surface preparation
Abrasive Blast clean to Sa 2 ½ (ISO 8501-1:1988) or SSPC-SP6
Paint system
Coat Nominal thickness in µm Trade name Description Colour
1 80 Interseal 670 HS-Alu Surface tolerant Epoxy-Alu pigmented Alu
2 80 Interseal 670 HS Surface tolerant Epoxy
3 80 Interseal 670 HS Surface tolerant Epoxy
Total 240
Cleaning before surface preparation
PAINT SYSTEM FOR MAINTENANCE WORKS (on site)
All surfaces should be clean,dry and free of contamination.Pre-treat in accordance with ISO 8504:2000
Surface preparation
Paint system
Hand or Power tool clean all damaged and corroded areas to a minimum of St2 of ISO 8591-1 or SSPC-SP2
Coat Nominal thickness in µm Trade name Description Colour
1 80 Interseal 670 HS-Alu Surface tolerant Epoxy-Alu pigmented Alu
2 80 Interseal 670 HS Surface tolerant Epoxy
3 80 Interseal 670 HS Surface tolerant Epoxy
Total 240
Surface preparation
Paint system
REPAIR PAINT SYSTEM (in fabrication shop & on site)
Hand or Power tool clean all damaged and corroded areas to a minimum of St2 of ISO 8591-1 or SSPC-SP2
Coat Nominal thickness in µm Trade name Description Colour
1 80 (if damaged) Interseal 670 HS-Alu Surface tolerant Epoxy-Alu pigmented Alu
2) 80 (if damaged) Interseal 670 HS Surface tolerant Epoxy
3 80 Interseal 670 HS Surface tolerant Epoxy
Total 240
*Type C: This paint system applies for:
• Exterior.
• Industrial areas and coastal areas.
• moderate salinity.
• no slag pits.