English (United Kingdom) - Paul Wurth
English (United Kingdom) - Paul Wurth
English (United Kingdom) - Paul Wurth
- TAGS
- wurth
- www.paulwurth.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PAINT SYSTEM TYPE G *<br />
PAINT MANUFACTURER INTERNATIONAL PAINT<br />
ENVIRONMENT<br />
DURABILITY<br />
Cleaning before surface preparation<br />
C4-High Corrosivity. (ISO 12944-2)<br />
Medium durability 5-15 years<br />
PAINT SYSTEM FOR NEW WORKS (in fabrication shop)<br />
All surfaces should be clean,dry and free of contamination.Pre-treat in accordance with ISO 8504:2000<br />
Surface preparation<br />
Abrasive Blast clean to Sa 2 ½ (ISO 8501-1:1988) or SSPC-SP6<br />
Paint system<br />
Coat Nominal thickness<br />
in µm<br />
Trade name Description Colour<br />
1 75 Interzinc 22 Inorganic zinc rich ethyl silicate primer Greyish Green<br />
2 25 Intertherm 50 1 component high temp. resistant coating with<br />
silicone binder<br />
Total 100<br />
Cleaning before surface preparation<br />
PAINT SYSTEM FOR MAINTENANCE WORKS (on site)<br />
All surfaces should be clean,dry and free of contamination.Pre-treat in accordance with ISO 8504:2000<br />
Surface preparation<br />
Abrasive Blast clean to Sa 2 ½ (ISO 8501-1:1988) or SSPC-SP6 (if possible on site) or<br />
Hand or Power tool clean damaged and corroded areas to a minimum of St2 of ISO 8591-1 or SSPC-SP2<br />
Paint system<br />
Coat Nominal thickness<br />
in µm<br />
Trade name Description Colour<br />
1 75 Interzinc 22 Inorganic zinc rich ethyl silicate primer Greyish Green<br />
2 25 Intertherm 50 1 component high temp. resistant coating with<br />
silicone binder<br />
Total 100<br />
Surface preparation<br />
REPAIR PAINT SYSTEM (in fabrication shop & on site)<br />
Spot abrasive blast corroded or damaged areas to a minimum of Sa 2 ½ (ISO 8501-1:1988) or SSPC-SP6<br />
(in shop and if possible on site) or<br />
Hand or power tool clean damaged and corroded areas to a minimum of St2 of ISO 8591-1 or SSPC-SP2 (on site)<br />
Paint system<br />
Coat Nominal thickness in<br />
µm<br />
Trade name Description Colour<br />
1 75 (if damaged) Interzinc 22 Inorganic zinc rich ethyl silicate primer Greyisch Green<br />
2 25 Intertherm<br />
50<br />
Total 100<br />
1 component high temp. resistant coating with<br />
silicone binder<br />
*Type G : This paint system applies for:<br />
• Exterior.<br />
• Industrial areas and coastal areas<br />
• Moderate salinity.<br />
• No slag pits<br />
• Temperature resistance from -10 Celsius to +540 Celcius.<br />
Alu<br />
Alu<br />
Alu