Geovision NVR Software Installation Guide - Use-IP
Geovision NVR Software Installation Guide - Use-IP
Geovision NVR Software Installation Guide - Use-IP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1.8 Installing Drivers<br />
1<br />
Video Capture Cards<br />
After you install the GV-Video Capture Card on the computer, the Found New Hardware<br />
Wizard will automatically detect the device. Ignore the wizard and follow these steps to<br />
install drivers:<br />
1. Insert the software DVD. It will run automatically and pop up a window.<br />
2. Select Install or Remove GeoVision GV-Series Cards Driver. This dialog box<br />
appears.<br />
Figure 1-21<br />
3. Click Install to install the drivers. When the installation is complete, this message will<br />
appear: Install Successfully.<br />
4. Click Exit to close the dialog box.<br />
Note:<br />
1. In Windows XP, the wizard will disappear after installation. In Windows 2000, close<br />
the wizard manually.<br />
2. For the installation of two GV-4008 cards, it is required to restart the computer after<br />
the driver is installed.<br />
45