Geovision NVR Software Installation Guide - Use-IP
Geovision NVR Software Installation Guide - Use-IP
Geovision NVR Software Installation Guide - Use-IP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2<br />
Hardware Accessories<br />
3. Multiple pieces of GV-I/O Box 16 are connected with the PC through separate<br />
RS-485 cables.<br />
After you connect multiple pieces of GV-I/O Box 16 with the PC through separate RS-<br />
485 cables, switch on Terminal Resistance Switches of the connected piece of GV-I/O<br />
Box 16 at the end of each cable.<br />
ON<br />
Terminal Resistance Switch<br />
Figure 2-36<br />
The default setting of the Switch is OFF. To switch on the Terminal<br />
Resistance Switch, push the switch downward.<br />
ON<br />
93