Geovision NVR Software Installation Guide - Use-IP
Geovision NVR Software Installation Guide - Use-IP
Geovision NVR Software Installation Guide - Use-IP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Important Notice before Using GV-Video Capture Card<br />
1. Exclusions:<br />
• Currently GV-Video Capture Cards are not compatible with VIA-series, ATI-series<br />
chipset motherboards.<br />
If your GV-Video Capture Card or GV-System works in conjunction with the following GV<br />
accessories, note the limitation that these accessories do not support 64-bit Windows<br />
versions currently.<br />
GV-Multi Quad Card GV-NET/IO Card (USB port connection)<br />
GV-COM Box GV-NET Card (USB port connection)<br />
GV-Hub Box GV-Keyboard V1/ V2<br />
2. Hard Disk Requirements:<br />
• It is strongly recommended to use two separate hard disks. One is for installing Windows<br />
operating system and GV-System software, and the other is for storing recorded files.<br />
• The total of recording frame rates that you can assign to a single hard disk is listed as<br />
below:<br />
Frame rate limit in a single hard disk when connecting to analog cameras<br />
� <strong>Software</strong> Compression<br />
Video Resolution<br />
NTSC<br />
MPEG4<br />
PAL<br />
CIF 480 fps 400 fps<br />
VGA/D1 240 fps 200 fps<br />
Turbo VGA 416 fps 400 fps<br />
Turbo D1 352 fps 320 fps<br />
� Hardware Compression<br />
Video Resolution<br />
NTSC<br />
H.264<br />
PAL<br />
D1 240 fps 200 fps<br />
1
Change language