Template BA B168xH238 - Hörmann

ENGLISHPrerequisitesA claim under this warranty is only valid for the country in whichthe equipment was bought. The product must have beenpurchased through our authorised distribution channels. A claimunder this warranty exists only for damage to the object of thecontract itself. Reimbursement of expenditure for dismantling andfitting, testing of corresponding parts, as well as demands for lostprofits and compensation for damages, are excluded from thewarranty.The receipt of purchase substantiates your right to claim under thewarranty.11.1 PerformanceFor the duration of the warranty we shall eliminate any productdefects that are proven to be attributable to a material ormanufacturing fault. We pledge to replace free of charge and atour discretion the defective goods with non-defective goods, tocarry out repairs, or to grant a price reduction.Damages caused by the following are excluded:• improper fitting and connection• improper initial start-up and operation• external factors such as fire, water, abnormal environmentalconditions• mechanical damage caused by accidents, falls, impacts• negligent or intentional destruction• normal wear or deficient maintenance• repairs conducted by unqualified persons• use of non-original parts• removal or defacing of the data plateReplaced parts become our property.12 Excerpt from the Declaration ofIncorporation(as defined in EC Machinery Directive 2006/42/EC forincorporation of partly completed machinery according to annex II,part 1 B).The product described on the reverse side has been developed,constructed and produced in accordance with the followingdirectives:• EC Machinery Directive 2006/42 EC• EC Construction Products Directive 89/106/EEC• EC Directive Low-Voltage 2006/95/EC• EC Electromagnetic Compatibility Directive 2004/108/ECApplied and consulted standards and specifications:• EN ISO 13849-1, PL “c”, Cat. 2Safety of machinery – Safety-related parts of control systems– Part 1: General principles• EN 60335-1/2, when applicableSafety of electrical appliances / Operators for doors• EN 61000-6-3Electromagnetic Compatibility – Electromagnetic radiation• EN 61000-6-2Electromagnetic Compatibility – Interference immunityPartly completed machinery as defined in the EC Directive2006/42/EC is only intended to be incorporated into or assembledwith other machinery or other partly completed machinery orequipment, thereby forming machinery to which this Directiveapplies.This is why this product must only be put into operation after it hasbeen determined that the entire machine/system in which it will beinstalled corresponds with the guidelines of the EC Directivementioned above.Any modification made to this product without our expresspermission and approval shall render this declaration null and void.1313.1Mains voltageStand-byTechnical DataOperatorProtection categoryAutomatic safety cut-outEnd-of-travel positioncut-out/force limitRated loadPull and push forceMotorTransformerConnectionSpecial functionsQuick releaseUniversal fittingsDoor travel speedGarage door operatorairborne sound emissionOperator boom230/240 V, 50/60 HzApprox. 4.5 WOnly for dry roomsIs automatically taught in forboth directions separatelySelf-learning, wear-free, as it isdesigned without mechanicalswitches, additionallyintegrated run time limitation toapprox. 60 s. Automatic safetycut-out, readjusting at everydoor runSee data labelSee data labelDirect current motor with hallsensorWith thermal protectionNo-screw connectiontechnology for externalequipment with 24 V DC lowsafety voltage, such as internaland external buttons withimpulse operation• Stop/off switch can beconnected• Photocell or closing edgesafety device can beconnected• Option relay for warninglamp, additional externalillumination can beconnected via HCP busadapterActuated from inside with pullcord in the event of a powerfailureFor up-and-over doors andsectional doors• In CLOSE directionmax. 14 cm/s 1)• In OPEN directionmax. 22 cm/s 1)70 dB (A)Extremely flat at 30 mm, withintegral door security kit andmaintenance-free toothed belt1) Depending on operator type, door type, door size and door leafweightTR10A041-F RE / 06.2010 37