Manual - Tracker

1. To set the bark detector sensitivity choose Main Menu > Targets > Dogs > <
name of the target> Configuration commands > Set bark sensitivity. If the
bark calculator does not work properly, try another bark sensitivity.
2. The barking interval is shown in the map view in the top bar, above the dog‟s icon
or you can go to map view with the target chosen, then press Menu > Target info.
Or you can see it in the messages, Main Menu > Messages
The device also includes bark/silence alarm. The alarm sends a message to the
hunter device when the bark interval is below/above preset values.
3. To set the bark alarm, choose Main Menu > Targets > Dogs > SMS alarms > Set bark alarm. Now set time limit and rate limit of the
bark. When the dog‟s barking frequency exceeds the value you set for it, in the
time period you set, you will receive an SMS notifying the dog has started barking.
When the barking frequency decreases below the values, you will receive another
notification.
NOTE!
Bark detector may be influenced by external sounds, like branches hitting the device.
Therefore, the device may detect barking when the dog is not actually barking. If the
bark detector does not function well, change the bark detector sensitivity.
36