Manual - Tracker

Power Save mode (GPS acquires position as powerfully as in Full Power, but
automatically reduces the power when GPS signal strength is good) provides a good
performance with less power consumption.
Off mode (GPS is Off but is turned on when the user acquires position data or according
to the settings of Geofence) consumes very little power, but the response time
increases. Also, when not using A-GPS, the device may have difficulty acquiring position
data.
GSM and GPS Off mode (both GSM and GPS are Off) means, that the device can not
be contacted. However, GSM module of the device is automatically turned on
periodically (every 30 minutes during the day and 60 minutes during the night – values
can be adjusted by Tracker customer support). This mode provides very low power
consumption.
To use this power mode it is recommended to stop all Live trackings and set SMS
tracking or Area alarm on for e.g. every 30 minutes or less. If you request tracking more
frequently than 15 minutes, the device stays on all times and this mode does not save
any more power than GPS Off state does.
Automatic mode adjusts the mode according to the status of the battery. When battery
is 70 % or more, the device is in the Power Save mode. When battery is 40 to 70 %, the
device is in GPS Off mode. Under 40 %, the device is in GSM and GPS Off mode. (The
values of Automatic mode can be adjusted by Tracker customer support the same way
as adjustments can be done in the GSM and GPS Off mode).
TIPS!
Although Tracker G400 has all of these features available, some other dog collars do not
have all of these functions available.
38