10.06.2013 Views

Manual - Tracker

Manual - Tracker

Manual - Tracker

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

5. The application informs you when registration is completed. The <strong>Tracker</strong> Live icon<br />

next to the target turns green.<br />

GPRS tracking<br />

In GPRS tracking the tracking data is sent through GPRS network via <strong>Tracker</strong> Live<br />

service instead of an SMS. This provides more frequent tracking with possibly much less<br />

cost comparing to SMS (NOTE! cost saving depends on the amount of tracking you do<br />

and the rate plan you have on the SIM card in the device.).<br />

There are 3 types of GPRS positioning: Background Tracking, Real Time Tracking and<br />

single position request over GPRS.<br />

In order to have Live trackings available, you must register the device to <strong>Tracker</strong> Live<br />

service and then connect to the service.<br />

1. To start Background Tracking, go to Main Menu > Targets > Dogs > <strong>Tracker</strong> Live > Background Tracking > Set the interval of tracking<br />

> Start<br />

2. To initiate Real Time Tracking, go to Map > Show > List all > Dogs > > Menu > Start Real Time Tracking. Wait a moment, and the dog<br />

starts “running” on your screen. To start Real Time Tracking with other than default<br />

duration and interval, go to Main Menu > Targets > Dogs > <br />

<strong>Tracker</strong> Live > Real Time Tracking > (Set the duration and interval of<br />

tracking) > Start (Note: these now become default RTT settings)<br />

3. To acquire single location through GPRS network, go to Map > Show > > Menu > Locate.<br />

NOTE!<br />

When you want to do real-time tracking with less than 30 second interval, your collar<br />

should be on Full Power mode.<br />

43

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!