Control de temperatura - ManageMyLife
Control de temperatura - ManageMyLife
Control de temperatura - ManageMyLife
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TROUBLESHOOTING<br />
Ice and Water<br />
No indicator lights<br />
are lit on dispenser<br />
control<br />
Freezerdoor is not closed.<br />
Refrigerator is not plugged in.<br />
Fuse is blown, or circuit breaker needs to<br />
be reset.<br />
Power outage has occurred.<br />
Refrigerator is in Sabbath Mo<strong>de</strong> (select<br />
mo<strong>de</strong>ls).<br />
Verify that freezer door is closed. Power is removed<br />
from the control when freezer door is opened.<br />
Plug in refrigerator.<br />
Replace any blown fuses.<br />
Check circuit breakers for any tripped circuits.<br />
Call local power company listing to report outage.<br />
See Sabbath Mo<strong>de</strong>, page 18.<br />
Ice or water are Freezerdoor is not closed. Verify that freezer door is closed. Power is removed<br />
not dispensed from the control when freezer door is opened.<br />
when pads are <strong>Control</strong>s are in lock mo<strong>de</strong> (select mo<strong>de</strong>ls). See Dispenser LOCK page 18.<br />
pressed Water tank is filling. At initial use, there is an approximate one- to twominute<br />
<strong>de</strong>lay in dispensing while the internal water<br />
tank is filling.<br />
Ice bin not installed properly. Reinstall ice bin, see page 16.<br />
Ice maker has just been installed or a Wait 2/4hours for ice production to begin or for ice<br />
large amount of ice has been used. maker to restock after emptied.<br />
Water pressure is to low. Water pressure must be between 35 to 100 pounds<br />
per square inch to function properly.<br />
A minimum pressure of 35 pounds per square inch is<br />
recommen<strong>de</strong>d for refrigeratorswith water filters.<br />
Water filter is clogged or needs to be Change water filter (see page 19).<br />
changed.<br />
Ice maker is not Ice maker has just been installed or a Wait 2/4hours for ice production to begin or for ice<br />
producing enough large amount of ice has been used. maker to restock after emptied.<br />
ice or ice is Water pressure is too low. Low water pressure can cause valve to leak.<br />
malformed Water pressure must be between 35 to 100 pounds<br />
per square inch to function properly. A minimum<br />
pressure of 35 pounds per square inch is<br />
recommen<strong>de</strong>d for refrigeratorswith water filters.<br />
Water filter is clogged or needs to be Change water filter (see page 19).<br />
changed.<br />
Ice forms in inlet Water pressure is too low. Water pressure must be between 35 to 100 pounds<br />
tube to ice maker per square inch to function properly.<br />
A minimum pressure of 35 pounds per square inch is<br />
recommen<strong>de</strong>d for refrigeratorswith water filters.<br />
Saddle valve not open completely. Open saddle valve completely.<br />
Freezertemperature is too high. See Temperature Contro/s, pages 9-11. Freezer<br />
temperature should be between 0° to 2° F (-18° to<br />
-17° C).<br />
Refrigerator is Plastic tubing was used to complete The manufacturer recommends using copper tubing<br />
leaking water water connection, for installation. Plastic is less durable and can cause<br />
leakage. The manufacturer is not responsible for<br />
property damage due to improper installation or<br />
water connection.<br />
Improper water valve was installed. See Connecting the Water Supply, pages 6 and Z<br />
Self-piercing and _" saddle valves cause low water<br />
pressure and may clog the line over time. The<br />
manufacturer is not responsible for property<br />
damage due to improper installation or water<br />
connection.<br />
Cont. 32
Change language