CARSON Raptor Pro V25 www.carson-modelsport.com - Tamiya

Tools Needed for the AssemblyModelling knife 30 007 4053Instant adhesive 30 005 3339Needle nose pliers 30 007 4034Scissors 30 001 3305GBPhilips screwdriver (small and big)and hex-wrench1,5/ 2 / 2,5 mm 30 007 4023Hexagonal wrench 30 001 3118Tweezers 30 007 4003Side cutter 30 007 4035a. Your Radio System (only for RTR version)Please read the instructions provided with your radio system beforeusing it.The servos must be set at the centre position before installation. To setthe servos at a neutral position, turn on the transmitter and receiver.Set the trim levers in the centre position and turn off the receiver, andthen the transmitter. The servos will be in proper neutral position forinstallation.Receiver antennaBatteries for receiverTransmitterSwitchEngine throttle servoSteering servo18CARSON Raptor Pro V25