roweld cnc s4 - Rothenberger

More documents

Recommendations

Info

26 5. Automatic Welding Procedures ROTHENBERGER DATALINE -------P 160B-------- >>WELDING
5.2 Material data In a next step the display shows the material data: Press ENTER if no changes are necessary. Material : PE-100 Outer dia. : 160 Wall thickn. : 9.1 SDR : 17.6 Joint: P/P Length : 12 Angle : 0 Batch no. 01234/0101 Changing material: To change material default press ESC. The cursor automatically jumps to line 1. Use main selector keys (up/down) to select the required material. You may only select a stored material default. If the required material is not listed, go to DATALINE Section 3.1.4 Defaults, level 3, pipe materials. Changing outer diameter: By pressing the ENTER key the cursor automatically jumps to the next line. Use the main selector keys to select the required outer diameter default or enter with key panel. The wall thickness in conjunction with the selected SDR changes automatically. Changing wall thickness: By pressing the ENTER key the cursor automatically jumps to the next line. Use the main selector keys to define the wall thickness default or enter with key panel. If you use the main selector keys, the SDR changes automatically. If you enter the default through the key panel, the SDR is not adjusted. The SDR line is blank. It is not possible to directly enter the SDR. Changing joint type: Use the main selector keys to select the weldament joint type. It is not possible to enter this information with the key panel. The joint type P/P refers to a pipe to pipe weldament joint (serves as information only, e. g. for alignment purposes). Changing lengths: Use the key panel to enter pipe length. The unit of measure is user programmable (m, cm, etc.). We highly recommend we recommend setting up rules on length entry formats prior to entering information (serves as information only, e. g. for alignment purposes). Changing angle: If a welding machine has been selected that allows the operator to fabricate segment angles, enter the overall angle of the segment. This information is decisive for calculating the welding parameters. As soon as the segment is complete, reset default to original value. ENGLISH 27
Page 1 and 2: 5.3765 ROWELD P160-355B 230V 5.4799
Page 3 and 4: Inhalt Seite 1. Hinweise zur Sicher
Page 5 and 6: stehen. Ein Moment der Unachtsamkei
Page 7 and 8: 3. Technische Daten Basis-Steuerung
Page 9 and 10: Not-Aus-Taster Hydraulikmotor mit A
Page 11 and 12: Maschinentyp: In Zeile 4 kann der M
Page 13 and 14: Protokollnummer: Diese Nummer dient
Page 15 and 16: 5.4 Fräsvorgang Hierbei müssen di
Page 17 and 18: 5.9 Druckaufbau Treffen die Rohrend
Page 19 and 20: Contents Page 1. Safety Instruction
Page 21 and 22: c) Avoid accidental starting. Ensur
Page 23 and 24: 3. Technical Data Operator control
Page 25 and 26: emergency STOP button hydraulic pum
Page 27: Machine type: Select machine type i
Page 31 and 32: 5.4 Trimming The pipe sections for
Page 33 and 34: 5.9 Pressure build-up When the pipe
Page 35 and 36: Sommaire Page 1. Consignes de sécu
Page 37 and 38: ) Portez des équipements de protec
Page 39 and 40: 3. Donnés Techniques Programmation
Page 41 and 42: Touche d’arrêt urgence Moteur hy
Page 43 and 44: Type de machine : Sélectionner le
Page 45 and 46: 5.2 Donnés matériau Dans l’éta
Page 47 and 48: 5.4 Dispositif de fraisage Les tube
Page 49 and 50: 5.9 Montée en pression Quand les b
Page 51 and 52: Indice Página 1. Avisos sobre la s
Page 53 and 54: consumido alcohol, drogas o medicam
Page 55 and 56: 3. Datos técnicos Control básico
Page 57 and 58: Tecla de parada de emergencia Motor
Page 59 and 60: Tipo de máquina: El tipo de máqui
Page 61 and 62: 5.2 Datos sobre el material Como pu
Page 63 and 64: 5.4 Proceso de fresado Para ello de
Page 65 and 66: 5.9 Formación de presión Si las p
Page 67 and 68: Anhang / Appendix 1 65
Page 77 and 78: Anhang / Appendix 2 Pos. Bezeichnun
Page 79 and 80:
Anhang / Appendix 2 Pos. Bezeichnun
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Zubehör und Ersatzteile / Accessor
Page 137 and 138:
Notes 135
Page 139 and 140:
Notes 137
show all

roweld cnc s4 - Rothenberger

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?