You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTALLATION INSTRUCTIONS Avoid pointing the lens directly towards the sun or intense sources of light, even when the dome isoff. The subject must not be backlit. Some lighting systems (e.g. coloured fluorescent lights) may distort the colours. Arrange a suitable circuit breaker and fuse upstream of the devices. Make sure that the rating plate data corresponds to the power specifications before connecting thedevice to the mains.SAFETY PRECAUTIONS Avoid introducing any object or liquid into the device. If this should accidentally occur, disconnect thedevice from the mains and have it inspected by qualified personnel.INSTALLATION PRECAUTIONSArrange the device in a well-ventilated place to prevent overheating.For the same reason, do not install sources of heat, such as radiators or hot air ducts. Keep awayfrom direct sunlight. Do not install in areas subject to excessive dust, mechanical vibrations orshocks.Take the operating temperature range of the device (from 0°C to +40°C) into account when choosingthe installation place. Do not install the unit over another unit which generates heat.Wait for a while before operating a device immediately after transporting it from a cold place to awarm place and vice versa. Wait on average for three hours: this will allow the device to adapt to thenew ambient (temperature, humidity, etc.).Do not arrange this device on an unstable surface, such as a tottering or slanted table. The devicecould fall causing injury or mechanical failures.30 DS<strong>1092</strong>-041C
Change language