Sch./Ref./Réf./Typ 1092/601 Mod. 1092

DESCRIPTION OF FUNCTIONS AVAILABLE IN COMBINATION WITH CONTROLPANEL REF. 1092/62064 preset positions: This function is used to store up to 50 presetting fixed positions for use with thefunctions described below. The remaining 14 preset positions are used by the dome for specialfunctions and cannot be changed. The preset position settings will be stored in event of a blackout.Panning between two preset positions: This function is used to pan between two previously storedpreset positions. The most suitable speed (from 0 to 80 degrees per second) may be selected.Six programmable track tour groups: This function is used to set a sequence of frames which willbe displayed in the programmed order (tour). Each tour may comprise 16 preset positions. Thecurrent speed and the pause time can be programmed by the user. The data will be stored following ablackout.Default tour: This consists of the first 16 preset positions. If one or more preset positions are notstored, they cannot be taken into consideration and the tour will only include the preset positionswhich are present. The pause time between preset positions is fixed to 4 seconds and cannot bechanged.Home position: This function is used to automatically position the dome in preset position 1 (homeposition) if no controls are imparted from the control panel after a certain time.Continuous 360° scan: This function is used to turn the dome by 360° about its axis at thepreviously programmed pan position and speed.Repeat last function: This function is used to resume the last action that the domes was performingbefore being interrupted by a user’s operation.Important note: The user’s settings will be stored in event of a blackout. If a function is interrupted inprogress, the dome will automatically resume the position which was being performed as soon as theelectrical power supply will be re-established.DS1092-041C 49