Sony PCM-M10 - PCM-M10 Consignes d’utilisation Anglais
Sony PCM-M10 - PCM-M10 Consignes d’utilisation Anglais
Sony PCM-M10 - PCM-M10 Consignes d’utilisation Anglais
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
To stop recording<br />
Press x STOP.<br />
The ACCESS indicator flashes in orange and the <strong>PCM</strong><br />
recorder stops at the beginning of the current recording.<br />
x STOP<br />
Note while accessing<br />
The <strong>PCM</strong> recorder is recording data and saving it in memory when the ACCESS indicator flashes<br />
in orange. While the <strong>PCM</strong> recorder is accessing data, do not remove the batteries, plug or unplug<br />
the AC power adaptor or connecting cables. Doing so may damage the data.<br />
Other operations<br />
pause recording Press X PAUSE. During recording pause, “ ” flashes in the<br />
display window.<br />
release pause and resume Press X PAUSE again or press N PLAY/ENTER. Recording<br />
recording<br />
resumes from that point. (To stop recording after pausing recording,<br />
press x STOP.)<br />
24 GB<br />
z Tips<br />
• You can record up to 99 tracks in each folder.<br />
• When an excessive recording level (exceeding –1 dB) is detected during the recording standby<br />
mode, the peak level L/R OVER indicators light in red and the following level guide is displayed.<br />
You may solve the problem by moving the <strong>PCM</strong> recorder far from the sound source, or setting the<br />
MIC SENS(ATT) switch to “LOW.” If the problem persists, use manual recording (page 33).