Sony PCM-M10 - PCM-M10 Consignes d’utilisation Anglais

Menu items Settings (*: Initial setting) See page
LIMITER Set the input level automatically to prevent the sound distortion
that may occur when a too loud sound is input in Manual
recording.
ON:
The LIMITER function is activated.
OFF*:
The LIMITER function is cancelled.
44
PRE REC
P Note
This feature is effective only when REC LEVEL switch is set to
“MANUAL.”
z On the limiter circuit
• The limiter circuit functions to keep the signal level below the
maximum input level. When a loud sound is input suddenly, the
excess part of the sound is automatically set within the range of
the maximum input level in order to prevent distortion.
• The limiter circuit of the PCM recorder does not compensate
for clipping when audio over 12 dB is input. In this case, sound
may be distorted.
Set the pre-recording function on and off. The pre-recording
function allows you to record sound sources for approximately 5
seconds prior to the point when the recording is started. Sounds
for approximately 5 seconds are buffered in the memory.
ON:
The pre-recording function is activated.
OFF*:
The pre-recording function is cancelled.
34
About the Menu Function
81 GB