Sony PCM-M10 - PCM-M10 Consignes d’utilisation Anglais

82
Menu items Settings (*: Initial setting) See page
GB
Audio Out Set the output of the i/LINE OUT (headphone/line output) jack. 58
Headphones*: You can use the jack as a headphone jack. Select
this option to listen playback sound with the headphones (not
supplied) or an external speaker.
LINE OUT: You can use the jack as a line output jack. Select this
option to connect an external recorder such as a tape recorder
for recording playback sound of the PCM recorder.
P Notes
• If “LINE OUT” is selected, do not connect headphones; the
playback sound from the headphones will be very loud.
• If “LINE OUT” is selected, you cannot adjust output volume
with the VOLUME +/– buttons and cannot use the Effect
function.
Plug In Power Set the Plug In Power function on and off. When a microphone –
compatible with the Plug In Power function is connected to the
m (microphone) jack of the PCM recorder, the PCM recorder
can supply power to the microphone.
ON*: The PCM recorder supplies power to the connected Plug In
Power type microphone.
OFF: The PCM recorder does not supply power to a connected
microphone.
Cross-Memory
Recording
Set the Cross-Memory Recording function on and off. When the
memory currently selected in the “Memory” setting in the menu
becomes full during recording, the PCM recorder automatically
switches its destination to the other memory media and continues
recording (Cross-Memory Recording). The new recording is
saved as another track.
ON: The Cross-Memory Recording function is activated.
OFF*: The Cross-Memory Recording function is disabled.
Recording stops when the memory currently being selected
becomes full.
39